Adam Piasecki

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2020-2024
Publications (10 Years): 42

Top Topics

Carbon Nanotubes

Hyaluronic Acid

Electron Microscopy

Top Venues

Materials (Basel, Switzerland)

Molecules (Basel, Switzerland)

Nanomaterials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Paulina Kosmela, Kamila Sałasińska, Daria Kowalkowska-Zedler, Mateusz Barczewski, Adam Piasecki, Mohammad Reza Saeb, Aleksander Hejna
Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles. Polymers 16 (5) (2024)
Adam Piasecki, Julia Sobkowiak, Dariusz Boroński, Katarzyna Siwińska-Ciesielczyk, Piotr Paczos
The Influence of the Modification of Carbon Nanotubes on the Properties of Copper Matrix Sintered Materials. Materials (Basel, Switzerland) 17 (6) (2024)
Mateusz Barczewski, Aleksander Hejna, Jacek Andrzejewski, Joanna Aniśko, Adam Piasecki, Adrian Mróz, Zaida Ortega, Daria Rutkowska, Kamila Sałasińska
The Recyclability of Fire-Retarded Biobased Polyamide 11 (PA11) Composites Reinforced with Basalt Fibers (BFs): The Influence of Reprocessing on Structure, Properties, and Fire Behavior. Molecules (Basel, Switzerland) 29 (13) (2024)
Adam Piasecki, Julia Sobkowiak, Dariusz Boroński, Katarzyna Siwińska-Ciesielczyk, Piotr Paczos
The Influence of the Modification of Carbon Nanotubes on the Properties of Copper Matrix Sintered Materials. Materials (Basel, Switzerland) 17 (6) (2024)
Paulina Kosmela, Kamila Sałasińska, Daria Kowalkowska-Zedler, Mateusz Barczewski, Adam Piasecki, Mohammad Reza Saeb, Aleksander Hejna
Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles. Polymers 16 (5) (2024)
Mateusz Barczewski, Aleksander Hejna, Jacek Andrzejewski, Joanna Aniśko, Adam Piasecki, Adrian Mróz, Zaida Ortega, Daria Rutkowska, Kamila Sałasińska
The Recyclability of Fire-Retarded Biobased Polyamide 11 (PA11) Composites Reinforced with Basalt Fibers (BFs): The Influence of Reprocessing on Structure, Properties, and Fire Behavior. Molecules (Basel, Switzerland) 29 (13) (2024)
Sebastian Jurczyk, Jacek Andrzejewski, Adam Piasecki, Marta Musioł, Joanna Rydz, Marek Kowalczuk
Mechanical and Rheological Evaluation of Polyester-Based Composites Containing Biochar. Polymers 16 (9) (2024)
Sebastian Jurczyk, Jacek Andrzejewski, Adam Piasecki, Marta Musioł, Joanna Rydz, Marek Kowalczuk
Mechanical and Rheological Evaluation of Polyester-Based Composites Containing Biochar. Polymers 16 (9) (2024)
Paulina Kosmela, Kamila Sałasińska, Daria Kowalkowska-Zedler, Mateusz Barczewski, Adam Piasecki, Mohammad Reza Saeb, Aleksander Hejna
Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles. Polymers 16 (5) (2024)
Natalia Wierzbicka, Rafał Talar, Karol Grochalski, Adam Piasecki, Wiesław Graboń, Miłosz Węgorzewski, Adam Reiter
Influence of Inorganic Additives on the Surface Characteristics, Hardness, Friction and Wear Behavior of Polyethylene Matrix Composites. Materials (Basel, Switzerland) 16 (14) (2023)
Mateusz Barczewski, Olga Mysiukiewicz, Michał Dutkiewicz, Mariusz Szołyga, Monika Dobrzyńska-Mizera, Adam Piasecki
Effect of Shear Stress during Processing on Structure, Morphology, and Properties of Isotactic Polypropylene Nucleated with Silsesquioxane-Based β-Nucleating Agent. Materials (Basel, Switzerland) 16 (10) (2023)
Aleksander Hejna, Mateusz Barczewski, Paulina Kosmela, Olga Mysiukiewicz, Adam Piasecki, Agnieszka Tercjak
Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification. Materials (Basel, Switzerland) 16 (20) (2023)
Adam Olszewski, Paulina Kosmela, Adam Piasecki, Wiktoria Żukowska, Mariusz Szczepański, Paweł Wojtasz, Mateusz Barczewski, Roman Barczewski, Aleksander Hejna
Comprehensive Investigation of Stoichiometry-Structure-Performance Relationships in Flexible Polyurethane Foams. Polymers 14 (18) (2022)
Adam Piasecki, Mateusz Kotkowiak, Maciej Tulinski, Robert Čep
Tribological Properties of Cu-MoS 2 -WS 2 -Ag-CNT Sintered Composite Materials. Materials (Basel, Switzerland) 15 (23) (2022)
Mateusz Kotkowiak, Adam Piasecki, Michał Kotkowiak, Tomasz Buchwald
The Mechanism of Wear Reduction in the Ni-CaF 2 Composite Material: Raman and Confocal Microscopy Insights. Materials (Basel, Switzerland) 15 (16) (2022)
Adam Piasecki, Mateusz Kotkowiak, Maciej Tulinski, Robert Čep
Tribological Properties of Cu-MoS 2 -WS 2 -Ag-CNT Sintered Composite Materials. Materials (Basel, Switzerland) 15 (23) (2022)
Mateusz Barczewski, Maria Kurańska, Kamila Sałasińska, Joanna Aniśko, Joanna Szulc, Izabela Szafraniak-Wiza, Aleksander Prociak, Krzysztof Polaczek, Katarzyna Uram, Karolina Surmacz, Adam Piasecki
Comprehensive Analysis of the Influence of Expanded Vermiculite on the Foaming Process and Selected Properties of Composite Rigid Polyurethane Foams. Polymers 14 (22) (2022)
Adam Olszewski, Paulina Kosmela, Adam Piasecki, Mateusz Barczewski, Aleksander Hejna
The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites. Polymers 14 (24) (2022)
Natalia Makuch, Michał Kulka, Mourad Keddam, Adam Piasecki
Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials (Basel, Switzerland) 16 (1) (2022)
Natalia Makuch, Michał Kulka, Mourad Keddam, Adam Piasecki
Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials (Basel, Switzerland) 16 (1) (2022)
Natalia Makuch, Michał Kulka, Mourad Keddam, Adam Piasecki
Growth Kinetics, Microstructure Evolution, and Some Mechanical Properties of Boride Layers Produced on X165CrV12 Tool Steel. Materials (Basel, Switzerland) 16 (1) (2022)
Mateusz Kotkowiak, Adam Piasecki
Characterization of Wear Properties of Pure Nickel Modified by Ni-Cr Composite and CaF 2 Solid Lubricant Addition. Materials (Basel, Switzerland) 15 (21) (2022)
Adam Olszewski, Paulina Kosmela, Adam Piasecki, Mateusz Barczewski, Aleksander Hejna
The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites. Polymers 14 (24) (2022)
Wiktoria Żukowska, Paulina Kosmela, Paweł Wojtasz, Mariusz Szczepański, Adam Piasecki, Roman Barczewski, Mateusz Barczewski, Aleksander Hejna
Comprehensive Enhancement of Prepolymer-Based Flexible Polyurethane Foams' Performance by Introduction of Cost-Effective Waste-Based Ground Tire Rubber Particles. Materials (Basel, Switzerland) 15 (16) (2022)
Joanna Aniśko, Mateusz Barczewski, Adam Piasecki, Katarzyna Skórczewska, Joanna Szulc, Marek Szostak
The Relationship between a Rotational Molding Processing Procedure and the Structure and Properties of Biobased Polyethylene Composites Filled with Expanded Vermiculite. Materials (Basel, Switzerland) 15 (17) (2022)
Adam Olszewski, Paulina Kosmela, Adam Piasecki, Mateusz Barczewski, Aleksander Hejna
The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites. Polymers 14 (24) (2022)
Olga Mysiukiewicz, Joanna Sulej-Chojnacka, Mateusz Kotkowiak, Tomasz Wiśniewski, Adam Piasecki, Mateusz Barczewski
Evaluation of the Oil-Rich Waste Fillers' Influence on the Tribological Properties of Polylactide-Based Composites. Materials (Basel, Switzerland) 15 (3) (2022)
Adam Piasecki, Mateusz Kotkowiak, Maciej Tulinski, Robert Čep
Tribological Properties of Cu-MoS 2 -WS 2 -Ag-CNT Sintered Composite Materials. Materials (Basel, Switzerland) 15 (23) (2022)
Mateusz Barczewski, Aleksander Hejna, Kamila Sałasińska, Joanna Aniśko, Adam Piasecki, Katarzyna Skórczewska, Jacek Andrzejewski
Thermomechanical and Fire Properties of Polyethylene-Composite-Filled Ammonium Polyphosphate and Inorganic Fillers: An Evaluation of Their Modification Efficiency. Polymers 14 (12) (2022)
Mateusz Barczewski, Olga Mysiukiewicz, Aleksander Hejna, Radosław Biskup, Joanna Szulc, Sławomir Michałowski, Adam Piasecki, Arkadiusz Kloziński
The Effect of Surface Treatment with Isocyanate and Aromatic Carbodiimide of Thermally Expanded Vermiculite Used as a Functional Filler for Polylactide-Based Composites. Polymers 13 (6) (2021)
Aleksander Hejna, Jerzy Korol, Paulina Kosmela, Anton Kuzmin, Adam Piasecki, Arkadiusz Kulawik, Błażej Chmielnicki
By-Products from Food Industry as a Promising Alternative for the Conventional Fillers for Wood-Polymer Composites. Polymers 13 (6) (2021)
Paulina Kosmela, Adam Olszewski, Łukasz Zedler, Paulina Burger, Adam Piasecki, Krzysztof Formela, Aleksander Hejna
Ground Tire Rubber Filled Flexible Polyurethane Foam-Effect of Waste Rubber Treatment on Composite Performance. Materials (Basel, Switzerland) 14 (14) (2021)
Karol Bula, Łukasz Klapiszewski, Adam Piasecki, Teofil Jesionowski
The Role of Inorganic-Organic Bio-Fillers Containing Kraft Lignin in Improvement in Functional Properties of Polyethylene. Materials (Basel, Switzerland) 14 (9) (2021)
Jakub Zdarta, Oliwia Degórska, Katarzyna Jankowska, Agnieszka Rybarczyk, Adam Piasecki, Filip Ciesielczyk, Teofil Jesionowski
Removal of Persistent Sulfamethoxazole and Carbamazepine from Water by Horseradish Peroxidase Encapsulated into Poly(Vinyl Chloride) Electrospun Fibers. International journal of molecular sciences 23 (1) (2021)
Katarzyna Siwińska-Ciesielczyk, Angelika Andrzejczak, Dominik Paukszta, Adam Piasecki, Dariusz Moszyński, Agnieszka Zgoła-Grześkowiak, Teofil Jesionowski
Synthesis of Selected Mixed Oxide Materials with Tailored Photocatalytic Activity in the Degradation of Tetracycline. Materials (Basel, Switzerland) 14 (18) (2021)
Michał Kulka, Daria Mikołajczak, Natalia Makuch, Piotr Dziarski, Damian Przestacki, Dominika Panfil-Pryka, Adam Piasecki, Andrzej Miklaszewski
Laser Surface Alloying of Austenitic 316L Steel with Boron and Some Metallic Elements: Microstructure. Materials (Basel, Switzerland) 13 (21) (2020)
Aneta Bartkowska, Dariusz Bartkowski, Mikołaj Popławski, Adam Piasecki, Damian Przestacki, Andrzej Miklaszewski
Microstructure, Microhardness, Corrosion Resistance and Chemical Composition of Mo, B and Mo-B Coatings Produced Using Laser Processing. Materials (Basel, Switzerland) 13 (15) (2020)
Aleksander Hejna, Mateusz Barczewski, Jacek Andrzejewski, Paulina Kosmela, Adam Piasecki, Marek Szostak, Tairong Kuang
Rotational Molding of Linear Low-Density Polyethylene Composites Filled with Wheat Bran. Polymers 12 (5) (2020)
Katarzyna Siwińska-Ciesielczyk, Beata Kurc, Dominika Rymarowicz, Adam Kubiak, Adam Piasecki, Dariusz Moszyński, Teofil Jesionowski
Crystallization of TiO2-MoS2 Hybrid Material under Hydrothermal Treatment and Its Electrochemical Performance. Materials (Basel, Switzerland) 13 (12) (2020)
Dariusz Bartkowski, Aneta Bartkowska, Paweł Popielarski, Jakub Hajkowski, Adam Piasecki
Characterization of W-Cr Metal Matrix Composite Coatings Reinforced with WC Particles Produced on Low-Carbon Steel Using Laser Processing of Precoat. Materials (Basel, Switzerland) 13 (22) (2020)
Jarosław Kałużny, Andrzej Kulczycki, Wojciech Dzięgielewski, Adam Piasecki, Bartosz Gapiński, Michał Mendak, Tomasz Runka, Damian Łukawski, Oleksandr Stepanenko, Jerzy Merkisz, Krzysztof Kempa
The Indirect Tribological Role of Carbon Nanotubes Stimulating Zinc Dithiophosphate Anti-Wear Film Formation. Nanomaterials (Basel, Switzerland) 10 (7) (2020)
Mateusz Barczewski, Olga Mysiukiewicz, Krzysztof Lewandowski, Daniel Nowak, Danuta Matykiewicz, Jacek Andrzejewski, Katarzyna Skórczewska, Adam Piasecki
Effect of Basalt Powder Surface Treatments on Mechanical and Processing Properties of Polylactide-Based Composites. Materials (Basel, Switzerland) 13 (23) (2020)