Asma Perveen

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2018-2024
Publications (10 Years): 18

Top Venues

Micromachines

Polymers

Materials (Basel, Switzerland)

Nazarbayev University

National University of Singapore (PHD)

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Nazarbayev University Aug 10 2015

Kazakhstan

Assistant Professor :: Mechanical Engineering

Education History

National University of Singapore Aug 01 2007 - Sep 30 2012

Singapore

PHD :: Mechanical Engineering

Publications

Muhammad P Jahan, Aakash Niraula, Muhammad Abdun Nafi, Asma Perveen
Multi-Scale Traditional and Non-Traditional Machining of Bulk Metallic Glasses (BMGs)-Review of Challenges, Recent Advances, and Future Directions. Micromachines 15 (6) (2024)
Muhammad P Jahan, Aakash Niraula, Muhammad Abdun Nafi, Asma Perveen
Multi-Scale Traditional and Non-Traditional Machining of Bulk Metallic Glasses (BMGs)-Review of Challenges, Recent Advances, and Future Directions. Micromachines 15 (6) (2024)
Andrey Yankin, Gaini Serik, Saniya Danenova, Yerassyl Alipov, Ali Temirgali, Didier Talamona, Asma Perveen
Optimization of Fatigue Performance of FDM ABS and Nylon Printed Parts. Micromachines 14 (2) (2023)
Aishabibi Mukhangaliyeva, Damira Dairabayeva, Asma Perveen, Didier Talamona
Optimization of Dimensional Accuracy and Surface Roughness of SLA Patterns and SLA-Based IC Components. Polymers 15 (20) (2023)
Andrey Yankin, Gaini Serik, Saniya Danenova, Yerassyl Alipov, Ali Temirgali, Didier Talamona, Asma Perveen
Optimization of Fatigue Performance of FDM ABS and Nylon Printed Parts. Micromachines 14 (2) (2023)
Andrey Yankin, Gaini Serik, Saniya Danenova, Yerassyl Alipov, Ali Temirgali, Didier Talamona, Asma Perveen
Optimization of Fatigue Performance of FDM ABS and Nylon Printed Parts. Micromachines 14 (2) (2023)
Andrey Yankin, Yerassyl Alipov, Ali Temirgali, Gaini Serik, Saniya Danenova, Didier Talamona, Asma Perveen
Optimization of Printing Parameters to Enhance Tensile Properties of ABS and Nylon Produced by Fused Filament Fabrication. Polymers 15 (14) (2023)
Andrey Yankin, Gaini Serik, Saniya Danenova, Yerassyl Alipov, Ali Temirgali, Didier Talamona, Asma Perveen
Optimization of Fatigue Performance of FDM ABS and Nylon Printed Parts. Micromachines 14 (2) (2023)
Amin Razeghiyadaki, Dongming Wei, Asma Perveen, Dichuan Zhang, Yanwei Wang
Effects of Melt Temperature and Non-Isothermal Flow in Design of Coat Hanger Dies Based on Flow Network of Non-Newtonian Fluids. Polymers 14 (15) (2022)
Daniyar Syrlybayev, Beibit Zharylkassyn, Aidana Seisekulova, Mustakhim Akhmetov, Asma Perveen, Didier Talamona
Optimisation of Strength Properties of FDM Printed Parts-A Critical Review. Polymers 13 (10) (2021)
Daniyar Syrlybayev, Beibit Zharylkassyn, Aidana Seisekulova, Asma Perveen, Didier Talamona
Optimization of the Warpage of Fused Deposition Modeling Parts Using Finite Element Method. Polymers 13 (21) (2021)
Azat Bilal, Asma Perveen, Didier Talamona, Muhammad Pervej Jahan
Understanding Material Removal Mechanism and Effects of Machining Parameters during EDM of Zirconia-Toughened Alumina Ceramic. Micromachines 12 (1) (2021)
Amin Razeghiyadaki, Dongming Wei, Asma Perveen, Dichuan Zhang
A Multi-Rheology Design Method of Sheeting Polymer Extrusion Dies Based on Flow Network and the Winter-Fritz Design Equation. Polymers 13 (12) (2021)
Medeu Amangeldi, Yanwei Wang, Asma Perveen, Dichuan Zhang, Dongming Wei
An Iterative Approach for the Parameter Estimation of Shear-Rate and Temperature-Dependent Rheological Models for Polymeric Liquids. Polymers 13 (23) (2021)
Muslim Mukhtarkhanov, Asma Perveen, Didier Talamona
Application of Stereolithography Based 3D Printing Technology in Investment Casting. Micromachines 11 (10) (2020)
Asif Rashid, Azat Bilal, Chong Liu, M P Jahan, Didier Talamona, Asma Perveen
Effect of Conductive Coatings on Micro-Electro-Discharge Machinability of Aluminum Nitride Ceramic Using On-Machine-Fabricated Microelectrodes. Materials (Basel, Switzerland) 12 (20) (2019)
Nurbol Sabyrov, M P Jahan, Azat Bilal, Asma Perveen
Ultrasonic Vibration Assisted Electro-Discharge Machining (EDM)-An Overview. Materials (Basel, Switzerland) 12 (3) (2019)
Azat Bilal, Muhammad Pervej Jahan, Didier Talamona, Asma Perveen
Electro-Discharge Machining of Ceramics: A Review. Micromachines 10 (1) (2018)

Asma Perveen.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Asma Perveen