Branko Šavija

Scopus Author ID Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2017-2023
Publications (10 Years): 20

Top Venues

Materials (Basel, Switzerland)

Polymers

International journal of fracture

Micromachines

TNO

Delft University of Technology (PHD)

This page only lists publications with an associated author ORCID identifier.

Affiliation History

TNO Sep 01 2017 - Apr 01 2018

Netherlands

Consultant :: Structural Reliability

Delft University of Technology Sep 01 2014 - Sep 01 2017

Netherlands

Post doctoral researcher :: Faculty of Civil Engineering and Geosciences

Education History

Delft University of Technology Sep 01 2010 - Oct 27 2014

Netherlands

PHD :: Faculty of Civil Engineering and Geosciences

Publications

Rowin J M Bol, Branko Šavija
Micromechanical Models for FDM 3D-Printed Polymers: A Review. Polymers 15 (23) (2023)
Abdullah M Tawfek, Zhi Ge, Jian Li, Kangkang Zhang, Nengdong Jiang, Yingxuan Shao, Yifeng Ling, Branko Šavija
Influence of Fiber Orientation on the Water and Ions Transportation of Engineered Cementitious Composite (ECC). Materials (Basel, Switzerland) 16 (13) (2023)
Rowin J M Bol, Branko Šavija
Micromechanical Models for FDM 3D-Printed Polymers: A Review. Polymers 15 (23) (2023)
Yonghao Li, Ning Zhang, Renjuan Sun, Yanhua Guan, Lemin Liu, Changjin Tian, Yifeng Ling, Hongzhi Zhang, Branko Šavija
Behavior of Engineered Cementitious Composites (ECCs) Subjected to Coupled Sustained Flexural Load and Salt Frost. Materials (Basel, Switzerland) 16 (1) (2022)
Yonghao Li, Ning Zhang, Renjuan Sun, Yanhua Guan, Lemin Liu, Changjin Tian, Yifeng Ling, Hongzhi Zhang, Branko Šavija
Behavior of Engineered Cementitious Composites (ECCs) Subjected to Coupled Sustained Flexural Load and Salt Frost. Materials (Basel, Switzerland) 16 (1) (2022)
Yonghao Li, Ning Zhang, Renjuan Sun, Yanhua Guan, Lemin Liu, Changjin Tian, Yifeng Ling, Hongzhi Zhang, Branko Šavija
Behavior of Engineered Cementitious Composites (ECCs) Subjected to Coupled Sustained Flexural Load and Salt Frost. Materials (Basel, Switzerland) 16 (1) (2022)
Jorge Marin-Montin, Eduardo Roque, Yading Xu, Branko Šavija, Juan Carlos Serrano-Ruiz, Francisco Montero-Chacón
Thermomechanical Performance Analysis of Novel Cement-Based Building Envelopes with Enhanced Passive Insulation Properties. Materials (Basel, Switzerland) 15 (14) (2022)
Bhavesh Chaudhari, Biranchi Panda, Branko Šavija, Suvash Chandra Paul
Microbiologically Induced Concrete Corrosion: A Concise Review of Assessment Methods, Effects, and Corrosion-Resistant Coating Materials. Materials (Basel, Switzerland) 15 (12) (2022)
Hongzhi Zhang, Yingxuan Shao, Ning Zhang, Abdullah M Tawfek, Yanhua Guan, Renjuan Sun, Changjin Tian, Branko Šavija
Carbonation Behavior of Engineered Cementitious Composites under Coupled Sustained Flexural Load and Accelerated Carbonation. Materials (Basel, Switzerland) 15 (18) (2022)
Zhi Wan, Yading Xu, Branko Šavija
On the Use of Machine Learning Models for Prediction of Compressive Strength of Concrete: Influence of Dimensionality Reduction on the Model Performance. Materials (Basel, Switzerland) 14 (4) (2021)
Fernando França de Mendonça Filho, Oguzhan Copuroglu, Erik Schlangen, Branko Šavija
Determination of Loss of Reinforcement Due to Corrosion through X-ray Computer Micro-Tomography. Materials (Basel, Switzerland) 14 (4) (2021)
Zixia Wu, Yading Xu, Branko Šavija
Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase Change Material. Materials (Basel, Switzerland) 14 (24) (2021)
Suvash Chandra Paul, Gideon P A G van Zijl, Branko Šavija
Effect of Fibers on Durability of Concrete: A Practical Review. Materials (Basel, Switzerland) 13 (20) (2020)
Janez Perko, Neven Ukrainczyk, Branko Šavija, Quoc Tri Phung, Eduardus A B Koenders
Influence of Micro-Pore Connectivity and Micro-Fractures on Calcium Leaching of Cement Pastes-A Coupled Simulation Approach. Materials (Basel, Switzerland) 13 (12) (2020)
Biranchi Panda, Nisar Ahamed Noor Mohamed, Suvash Chandra Paul, Gvp Bhagath Singh, Ming Jen Tan, Branko Šavija
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete. Materials (Basel, Switzerland) 12 (13) (2019)
Suvash Chandra Paul, Peter B K Mbewe, Sih Ying Kong, Branko Šavija
Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries. Materials (Basel, Switzerland) 12 (7) (2019)
Venura Kiloshana Karunarathne, Suvash Chandra Paul, Branko Šavija
Development of Nano-SiO2 and Bentonite-Based Mortars for Corrosion Protection of Reinforcing Steel. Materials (Basel, Switzerland) 12 (16) (2019)
Yidong Gan, Hongzhi Zhang, Branko Šavija, Erik Schlangen, Klaas van Breugel
Static and Fatigue Tests on Cementitious Cantilever Beams Using Nanoindenter. Micromachines 9 (12) (2018)
Branko Šavija
Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review. Materials (Basel, Switzerland) 11 (5) (2018)
Dong Liu, Branko Šavija, Gillian E Smith, Peter E J Flewitt, Tristan Lowe, Erik Schlangen
Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling. International journal of fracture 205 (1) (2017)

Branko Šavija.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Branko Šavija