Ibrahim Mohammed Alarifi (Ibrahim M Alarifi)

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2018-2022
Publications (10 Years): 16

Top Venues

Materials (Basel, Switzerland)

Scientific reports

Micromachines

Polymers

Majmaah University College of Engineering

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Majmaah University College of Engineering Sep 13 2019

Saudi Arabia

Dircotr of Engineering and Applied Sciences Research Center :: Mechanical and Industrial Engineering

Publications

Uzair Sajjad, Imtiyaz Hussain, Waseem Raza, Muhammad Sultan, Ibrahim Mohammed Alarifi, Chi-Chuan Wang
On the Critical Heat Flux Assessment of Micro- and Nanoscale Roughened Surfaces. Nanomaterials (Basel, Switzerland) 12 (18) (2022)
Long Zhang, Farzana Bibi, Imtiyaz Hussain, Muhammad Sultan, Adeel Arshad, Saqib Hasnain, Ibrahim Mohammed Alarifi, Mohammed A Alamir, Uzair Sajjad
Evaluating the Stress-Strain Relationship of the Additively Manufactured Lattice Structures. Micromachines 14 (1) (2022)
Manahel Shahath Khalaf, Amer M Ibrahim, Hadee Mohammed Najm, Mohanad Muayad Sabri Sabri, Samadhan Morkhade, Ashish Agarwal, Mohammed A Alamir, Ibrahim Mohammed Alarifi
Experimental Analysis of Steel Circular Hollow Section under Bending Loads: Comprehensive Study of Mechanical Performance. Materials (Basel, Switzerland) 15 (12) (2022)
Long Zhang, Farzana Bibi, Imtiyaz Hussain, Muhammad Sultan, Adeel Arshad, Saqib Hasnain, Ibrahim Mohammed Alarifi, Mohammed A Alamir, Uzair Sajjad
Evaluating the Stress-Strain Relationship of the Additively Manufactured Lattice Structures. Micromachines 14 (1) (2022)
Khalid Alblalaihid, Saleh A Alghamdi, Anas Alburayt, Saif H Almutairi, Ahmed Alwahid, Meshal Abuobaid, Sabri Alkhibari, Khaled S Almutairi, Ibrahim Mohammed Alarifi
Interlayer Defect Detection in Intra-Ply Hybrid Composite Material (GF/CF) Using a Capacitance-Based Sensor. Sensors (Basel, Switzerland) 22 (8) (2022)
Manahel Shahath Khalaf, Amer M Ibrahim, Hadee Mohammed Najm, Amer Hassan, Mohanad Muayad Sabri Sabri, Mohammed A Alamir, Ibrahim Mohammed Alarifi
Evaluation and Prediction of the Bending Behavior of Circular Hollow Steel Tube Sections Using Finite Element Analysis. Materials (Basel, Switzerland) 15 (11) (2022)
T Sathish, V Mohanavel, Arun Kumar Thirugnanasambandam, T Raja, Ahmad Rashedi, Ibrahim Mohammed Alarifi, Irfan Anjum Badruddin, Ali Algahtani, Asif Afzal
Investigation of Mechanical Properties and Salt Spray Corrosion Test Parameters Optimization for AA8079 with Reinforcement of TiN + ZrO2. Materials (Basel, Switzerland) 14 (18) (2021)
Chelliah Anand Chairman, Manickam Ravichandran, Vinayagam Mohanavel, Thanikodi Sathish, Ahmad Rashedi, Ibrahim Mohammed Alarifi, Irfan Anjum Badruddin, Ali E Anqi, Asif Afzal
Mechanical and Abrasive Wear Performance of Titanium Di-Oxide Filled Woven Glass Fibre Reinforced Polymer Composites by Using Taguchi and EDAS Approach. Materials (Basel, Switzerland) 14 (18) (2021)
Tanner David Harpool, Ibrahim Mohammed Alarifi, Basheer A Alshammari, Abdul Aabid, Muneer Baig, Rizwan Ahmed Malik, Ahmed M Sayed, Ramazan Asmatulu, Tarek Mohamed Ahmed Ali El-Bagory
Evaluation of the Infill Design on the Tensile Response of 3D Printed Polylactic Acid Polymer. Materials (Basel, Switzerland) 14 (9) (2021)
Kiran Shahapurkar, Venkatesh Chenrayan, Belay Brehane Tesfamarium, Manzoore Elahi M Soudagar, Nazia Hossain, Ali A Rajhi, Sagr Alamri, Ibrahim Mohammed Alarifi, Pavan Shahapurkar, Muhammad Mujtaba Abbas, M C Kiran, Gulam Mohammed Sayeed Ahmed
Parametric Analysis of Epoxy/Crumb Rubber Composite by Using Taguchi-GRA Hybrid Technique. Polymers 13 (19) (2021)
Ibrahim Mohammed Alarifi
Investigation into the Structural, Chemical and High Mechanical Reforms in B4C with Graphene Composite Material Substitution for Potential Shielding Frame Applications. Molecules (Basel, Switzerland) 26 (7) (2021)
Amin Asadi, Ibrahim Mohammed Alarifi
Effects of ultrasonication time on stability, dynamic viscosity, and pumping power management of MWCNT-water nanofluid: an experimental study. Scientific reports 10 (1) (2020)
Zongjie Lyu, Amin Asadi, Ibrahim Mohammed Alarifi, Vakkar Ali, Loke K Foong
Thermal and Fluid Dynamics Performance of MWCNT-Water Nanofluid Based on Thermophysical Properties: An Experimental and Theoretical Study. Scientific reports 10 (1) (2020)
Ibrahim Mohammed Alarifi, Hoang M Nguyen, Ali Naderi Bakhtiyari, Amin Asadi
Feasibility of ANFIS-PSO and ANFIS-GA Models in Predicting Thermophysical Properties of Al2O3-MWCNT/Oil Hybrid Nanofluid. Materials (Basel, Switzerland) 12 (21) (2019)
Mehdi Bayat, Ibrahim Mohammed Alarifi, Ali Akbar Khalili, Tarek M A A El-Bagory, Hoang Minh Nguyen, Amin Asadi
Thermo-mechanical contact problems and elastic behaviour of single and double sides functionally graded brake disks with temperature-dependent material properties. Scientific reports 9 (1) (2019)
Ibrahim Mohammed Alarifi, Waseem S Khan, Ramazan Asmatulu
Synthesis of electrospun polyacrylonitrile- derived carbon fibers and comparison of properties with bulk form. PloS one 13 (8) (2018)

Ibrahim Mohammed Alarifi.css-eqlu8i{font-size:small;padding-left:4px;} (Ibrahim M Alarifi)

Publication Activity (10 Years)

Top Topics

Top Venues

Ibrahim Mohammed Alarifi (Ibrahim M Alarifi)