Irene Buj-Corral

Publication Activity (10 Years)

Years Active: 2018-2023
Publications (10 Years): 23

Top Topics

Systemic Sclerosis

Radical Prostatectomy

Top Venues

Materials (Basel, Switzerland)

Gels (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Arnau Valls Esteve, Aitor Tejo-Otero, Pamela Lustig-Gainza, Irene Buj-Corral, Felip Fenollosa-Artés, Josep Rubio-Palau, Ignasi Barber-Martinez de la Torre, Josep Munuera, Constantino Fondevila, Lucas Krauel
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training. Gels (Basel, Switzerland) 9 (4) (2023)
Arnau Valls Esteve, Aitor Tejo-Otero, Pamela Lustig-Gainza, Irene Buj-Corral, Felip Fenollosa-Artés, Josep Rubio-Palau, Ignasi Barber-Martinez de la Torre, Josep Munuera, Constantino Fondevila, Lucas Krauel
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training. Gels (Basel, Switzerland) 9 (4) (2023)
Arnau Valls Esteve, Aitor Tejo-Otero, Núria Adell-Gómez, Pamela Lustig-Gainza, Felip Fenollosa-Artés, Irene Buj-Corral, Josep Rubio-Palau, Josep Munuera, Lucas Krauel
Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases. Bioengineering (Basel, Switzerland) 11 (1) (2023)
Arnau Valls Esteve, Aitor Tejo-Otero, Pamela Lustig-Gainza, Irene Buj-Corral, Felip Fenollosa-Artés, Josep Rubio-Palau, Ignasi Barber-Martinez de la Torre, Josep Munuera, Constantino Fondevila, Lucas Krauel
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training. Gels (Basel, Switzerland) 9 (4) (2023)
Enrique E Zayas-Figueras, Irene Buj-Corral
Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling. Micromachines 14 (2) (2023)
Arnau Valls Esteve, Aitor Tejo-Otero, Pamela Lustig-Gainza, Irene Buj-Corral, Felip Fenollosa-Artés, Josep Rubio-Palau, Ignasi Barber-Martinez de la Torre, Josep Munuera, Constantino Fondevila, Lucas Krauel
Patient-Specific 3D Printed Soft Models for Liver Surgical Planning and Hands-On Training. Gels (Basel, Switzerland) 9 (4) (2023)
Enrique E Zayas-Figueras, Irene Buj-Corral
Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling. Micromachines 14 (2) (2023)
Arnau Valls Esteve, Aitor Tejo-Otero, Núria Adell-Gómez, Pamela Lustig-Gainza, Felip Fenollosa-Artés, Irene Buj-Corral, Josep Rubio-Palau, Josep Munuera, Lucas Krauel
Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases. Bioengineering (Basel, Switzerland) 11 (1) (2023)
Enrique E Zayas-Figueras, Irene Buj-Corral
Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling. Micromachines 14 (2) (2023)
Irene Buj-Corral, Aitor Tejo-Otero
3D Printing of Bioinert Oxide Ceramics for Medical Applications. Journal of functional biomaterials 13 (3) (2022)
Irene Buj-Corral, Héctor Sanz-Fraile, Anna Ulldemolins, Aitor Tejo-Otero, Alejandro Domínguez-Fernández, Isaac Almendros, Jorge Otero
Characterization of 3D Printed Metal-PLA Composite Scaffolds for Biomedical Applications. Polymers 14 (13) (2022)
Aitor Tejo-Otero, Felip Fenollosa-Artés, Isabel Achaerandio, Sergi Rey-Vinolas, Irene Buj-Corral, Miguel Ángel Mateos-Timoneda, Elisabeth Engel
Soft-Tissue-Mimicking Using Hydrogels for the Development of Phantoms. Gels (Basel, Switzerland) 8 (1) (2022)
Irene Buj-Corral, Xavier Sánchez-Casas, Carmelo J Luis-Pérez
Analysis of AM Parameters on Surface Roughness Obtained in PLA Parts Printed with FFF Technology. Polymers 13 (14) (2021)
Irene Buj-Corral, Daniel Vidal, Aitor Tejo-Otero, Jose Antonio Padilla, Elena Xuriguera, Felip Fenollosa-Artés
Characterization of 3D Printed Yttria-Stabilized Zirconia Parts for Use in Prostheses. Nanomaterials (Basel, Switzerland) 11 (11) (2021)
Jordi Bonada, Maria Magdalena Pastor, Irene Buj-Corral
Influence of Infill Pattern on the Elastic Mechanical Properties of Fused Filament Fabrication (FFF) Parts through Experimental Tests and Numerical Analyses. Materials (Basel, Switzerland) 14 (18) (2021)
Irene Buj-Corral, Lourdes Rodero, Lluís Marco-Almagro
Optimization and Sensitivity Analysis of the Cutting Conditions in Rough, Semi-Finish and Finish Honing. Materials (Basel, Switzerland) 15 (1) (2021)
Carmelo J Luis-Pérez, Irene Buj-Corral, Xavier Sánchez-Casas
Modeling of the Influence of Input AM Parameters on Dimensional Error and Form Errors in PLA Parts Printed with FFF Technology. Polymers 13 (23) (2021)
Irene Buj-Corral, Ali Bagheri, Maurici Sivatte-Adroer
Effect of Printing Parameters on Dimensional Error, Surface Roughness and Porosity of FFF Printed Parts with Grid Structure. Polymers 13 (8) (2021)
Irene Buj-Corral, Alejandro Domínguez-Fernández, Ana Gómez-Gejo
Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes. Materials (Basel, Switzerland) 13 (9) (2020)
Irene Buj-Corral, Alejandro Domínguez-Fernández, Ramón Durán-Llucià
Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes. Materials (Basel, Switzerland) 12 (23) (2019)
Irene Buj-Corral, Jose-Antonio Ortiz-Marzo, Lluís Costa-Herrero, Joan Vivancos-Calvet, Carmelo Luis-Pérez
Optimal Machining Strategy Selection in Ball-End Milling of Hardened Steels for Injection Molds. Materials (Basel, Switzerland) 12 (6) (2019)
Irene Buj-Corral, Ali Bagheri, Oriol Petit-Rojo
3D Printing of Porous Scaffolds with Controlled Porosity and Pore Size Values. Materials (Basel, Switzerland) 11 (9) (2018)
Ali Bagheri, Irene Buj-Corral, Miquel Ferrer, Maria Magdalena Pastor, Francesc Roure
Determination of the Elasticity Modulus of 3D-Printed Octet-Truss Structures for Use in Porous Prosthesis Implants. Materials (Basel, Switzerland) 11 (12) (2018)