Jeng-Ywan Jeng

Publication Activity (10 Years)

Years Active: 2021-2024
Publications (10 Years): 19

Top Topics

Tissue Engineering

Mass Spectrometry

Top Venues

Materials (Basel, Switzerland)

3D printing and additive manufacturing

This page only lists publications with an associated author ORCID identifier.

Publications

Muhammad Rizwan Ul Haq, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
Investigating the Effect of Design Parameters on the Mechanical Performance of Contact Wave Springs Designed for Additive Manufacturing. 3D printing and additive manufacturing 11 (1) (2024)
Muhammad Rizwan Ul Haq, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
Investigating the Effect of Design Parameters on the Mechanical Performance of Contact Wave Springs Designed for Additive Manufacturing. 3D printing and additive manufacturing 11 (1) (2024)
Yu-Deh Chao, Shu-Cheng Liu, Dong-Quan Yeh, Ajeet Kumar, Jung-Ting Tsai, Mayur Jiyalal Prajapati, Jeng-Ywan Jeng
Development of Carbon Black Coating on TPU Elastic Powder for Selective Laser Sintering. Materials (Basel, Switzerland) 17 (13) (2024)
Chinmai Bhat, Mayur Jiyalal Prajapati, Ajeet Kumar, Jeng-Ywan Jeng
Additive Manufacturing-Enabled Advanced Design and Process Strategies for Multi-Functional Lattice Structures. Materials (Basel, Switzerland) 17 (14) (2024)
Chinmai Bhat, Mayur Jiyalal Prajapati, Ajeet Kumar, Jeng-Ywan Jeng
Additive Manufacturing-Enabled Advanced Design and Process Strategies for Multi-Functional Lattice Structures. Materials (Basel, Switzerland) 17 (14) (2024)
Chinmai Bhat, Mayur Jiyalal Prajapati, Ajeet Kumar, Jeng-Ywan Jeng
Additive Manufacturing-Enabled Advanced Design and Process Strategies for Multi-Functional Lattice Structures. Materials (Basel, Switzerland) 17 (14) (2024)
Yu-Deh Chao, Shu-Cheng Liu, Dong-Quan Yeh, Ajeet Kumar, Jung-Ting Tsai, Mayur Jiyalal Prajapati, Jeng-Ywan Jeng
Development of Carbon Black Coating on TPU Elastic Powder for Selective Laser Sintering. Materials (Basel, Switzerland) 17 (13) (2024)
Aamer Nazir, Ahmed Gohar, Shang-Chih Lin, Jeng-Ywan Jeng
Flexural Properties of Periodic Lattice Structured Lightweight Cantilever Beams Fabricated Using Additive Manufacturing: Experimental and Finite Element Methods. 3D printing and additive manufacturing 10 (6) (2023)
Sandeep Kumar Paral, Ding-Zheng Lin, Yih-Lin Cheng, Shang-Chih Lin, Jeng-Ywan Jeng
A Review of Critical Issues in High-Speed Vat Photopolymerization. Polymers 15 (12) (2023)
Aamer Nazir, Ahmed Gohar, Shang-Chih Lin, Jeng-Ywan Jeng
Flexural Properties of Periodic Lattice Structured Lightweight Cantilever Beams Fabricated Using Additive Manufacturing: Experimental and Finite Element Methods. 3D printing and additive manufacturing 10 (6) (2023)
Sandeep Kumar Paral, Ding-Zheng Lin, Yih-Lin Cheng, Shang-Chih Lin, Jeng-Ywan Jeng
A Review of Critical Issues in High-Speed Vat Photopolymerization. Polymers 15 (12) (2023)
Ajeet Kumar, Luca Collini, Chiara Ursini, Jeng-Ywan Jeng
Energy Absorption and Stiffness of Thin and Thick-Walled Closed-Cell 3D-Printed Structures Fabricated from a Hyperelastic Soft Polymer. Materials (Basel, Switzerland) 15 (7) (2022)
Aamer Nazir, Ahmad Bin Arshad, Shang-Chih Lin, Jeng-Ywan Jeng
Mechanical Performance of Lightweight-Designed Honeycomb Structures Fabricated Using Multijet Fusion Additive Manufacturing Technology. 3D printing and additive manufacturing 9 (4) (2022)
Mayur Jiyalal Prajapati, Chinmai Bhat, Ajeet Kumar, Saurav Verma, Shang-Chih Lin, Jeng-Ywan Jeng
Supportless Lattice Structure for Additive Manufacturing of Functional Products and the Evaluation of Its Mechanical Property at Variable Strain Rates. Materials (Basel, Switzerland) 15 (22) (2022)
Aamer Nazir, Ahmad Bin Arshad, Shang-Chih Lin, Jeng-Ywan Jeng
Mechanical Performance of Lightweight-Designed Honeycomb Structures Fabricated Using Multijet Fusion Additive Manufacturing Technology. 3D printing and additive manufacturing 9 (4) (2022)
Gul Jamil Shah, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
Design for Additive Manufacturing and Investigation of Surface-Based Lattice Structures for Buckling Properties Using Experimental and Finite Element Methods. Materials (Basel, Switzerland) 15 (11) (2022)
Aamer Nazir, Mubasher Ali, Jeng-Ywan Jeng
Investigation of Compression and Buckling Properties of a Novel Surface-Based Lattice Structure Manufactured Using Multi Jet Fusion Technology. Materials (Basel, Switzerland) 14 (10) (2021)
Aamer Nazir, Ahmad-Bin Arshad, Chi-Pin Hsu, Jeng-Ywan Jeng
Effect of Fillets on Mechanical Properties of Lattice Structures Fabricated Using Multi-Jet Fusion Technology. Materials (Basel, Switzerland) 14 (9) (2021)
Yeabsra Mekdim Hailu, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
The Effect of Functional Gradient Material Distribution and Patterning on Torsional Properties of Lattice Structures Manufactured Using MultiJet Fusion Technology. Materials (Basel, Switzerland) 14 (21) (2021)