Mauro Serpelloni

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2018-2022
Publications (10 Years): 10

Top Venues

Sensors (Basel, Switzerland)

The Review of scientific instruments

Biosensors

Pulmonary medicine

Università degli Studi di Brescia

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Università degli Studi di Brescia

Italy

Professore :: Dipartimento di ingegneria dell'informazione

Publications

Paolo Bellitti, Michela Borghetti, Nicola Francesco Lopomo, Emilio Sardini, Mauro Serpelloni
Smart Brace for Static and Dynamic Knee Laxity Measurement. Sensors (Basel, Switzerland) 22 (15) (2022)
Saad Abdullah, Mauro Serpelloni, Emilio Sardini
Design of multichannel potentiostat for remote and longtime monitoring of glucose concentration during yeast fermentation. The Review of scientific instruments 91 (5) (2021)
Tiziano Fapanni, Emilio Sardini, Mauro Serpelloni, Sarah Tonello
3D Electrochemical Sensor and Microstructuration Using Aerosol Jet Printing. Sensors (Basel, Switzerland) 21 (23) (2021)
Simone Pasinetti, Cristina Nuzzi, Nicola Covre, Alessandro Luchetti, Luca Maule, Mauro Serpelloni, Matteo Lancini
Validation of Marker-Less System for the Assessment of Upper Joints Reaction Forces in Exoskeleton Users. Sensors (Basel, Switzerland) 20 (14) (2020)
Emilio Sardini, Mauro Serpelloni, Sarah Tonello
Printed Electrochemical Biosensors: Opportunities and Metrological Challenges. Biosensors 10 (11) (2020)
Sarah Tonello, Andrea Bianchetti, Simona Braga, Camillo Almici, Mirella Marini, Giovanna Piovani, Michele Guindani, Kamol Dey, Luciana Sartore, Federica Re, Domenico Russo, Edoardo Cantù, Nicola Francesco Lopomo, Mauro Serpelloni, Emilio Sardini
Impedance-Based Monitoring of Mesenchymal Stromal Cell Three-Dimensional Proliferation Using Aerosol Jet Printed Sensors: A Tissue Engineering Application. Materials (Basel, Switzerland) 13 (10) (2020)
Matteo Filippini, Mauro Serpelloni, Valeria Quaranta, Paolo Bellitti, Emilio Sardini, Nicola Latronico
A New Method for In Vivo Analysis of the Performances of a Heat and Moisture Exchanger (HME) in Mechanically Ventilated Patients. Pulmonary medicine 2019 (2019)
Michela Borghetti, Mauro Serpelloni, Emilio Sardini
Printed Strain Gauge on 3D and Low-Melting Point Plastic Surface by Aerosol Jet Printing and Photonic Curing. Sensors (Basel, Switzerland) 19 (19) (2019)
Nicolò Giuseppe Di Novo, Edoardo Cantù, Sarah Tonello, Emilio Sardini, Mauro Serpelloni
Support-Material-Free Microfluidics on an Electrochemical Sensors Platform by Aerosol Jet Printing. Sensors (Basel, Switzerland) 19 (8) (2019)
Edoardo Cantù, Sarah Tonello, Giulia Abate, Daniela Uberti, Emilio Sardini, Mauro Serpelloni
Aerosol Jet Printed 3D Electrochemical Sensors for Protein Detection. Sensors (Basel, Switzerland) 18 (11) (2018)

Mauro Serpelloni.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Mauro Serpelloni