Muhammad Ali Khan (Muhammad Khan, Muhammad A Khan)

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2023
Publications (10 Years): 34

Top Venues

Polymers

Materials (Basel, Switzerland)

Sensors (Basel, Switzerland)

Cranfield University

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Cranfield University Jan 09 2017

United Kingdom

Senior Lecturer - Fatigue and Damage Tolerance :: Aerospace, Transport and Manufacturing

National University of Sciences and Technology Jul 19 2011 - Jan 08 2017

Pakistan

Assistant Professor :: Engineering Sciences

Universiti Teknologi Petronas Dec 16 2010 - Jul 18 2011

Malaysia

Lecturer :: Mechanical

Publications

Hamad Hasan Zedan Khalel, Muhammad Ali Khan
Modelling Fibre-Reinforced Concrete for Predicting Optimal Mechanical Properties. Materials (Basel, Switzerland) 16 (10) (2023)
Feiyang He, Haoran Ning, Muhammad Ali Khan
Effect of 3D Printing Process Parameters on Damping Characteristic of Cantilever Beams Fabricated Using Material Extrusion. Polymers 15 (2) (2023)
Ibrahim Alqahtani, Andrew Starr, Muhammad Ali Khan
Investigation of the Combined Influence of Temperature and Humidity on Fatigue Crack Growth Rate in Al6082 Alloy in a Coastal Environment. Materials (Basel, Switzerland) 16 (21) (2023)
Intisar Omar, Muhammad Ali Khan, Andrew Starr
Suitability Analysis of Machine Learning Algorithms for Crack Growth Prediction Based on Dynamic Response Data. Sensors (Basel, Switzerland) 23 (3) (2023)
Intisar Omar, Muhammad Ali Khan, Andrew Starr
Suitability Analysis of Machine Learning Algorithms for Crack Growth Prediction Based on Dynamic Response Data. Sensors (Basel, Switzerland) 23 (3) (2023)
Ibrahim Alqahtani, Andrew Starr, Muhammad Ali Khan
Coupled Effects of Temperature and Humidity on Fracture Toughness of Al-Mg-Si-Mn Alloy. Materials (Basel, Switzerland) 16 (11) (2023)
Zhichao Yang, Feiyang He, Muhammad Ali Khan
An Empirical Torsional Spring Model for the Inclined Crack in a 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Cantilever Beam. Polymers 15 (3) (2023)
Zhichao Yang, Feiyang He, Muhammad Ali Khan
An Empirical Torsional Spring Model for the Inclined Crack in a 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Cantilever Beam. Polymers 15 (3) (2023)
Intisar Omar, Muhammad Ali Khan, Andrew Starr
Suitability Analysis of Machine Learning Algorithms for Crack Growth Prediction Based on Dynamic Response Data. Sensors (Basel, Switzerland) 23 (3) (2023)
Feiyang He, Haoran Ning, Muhammad Ali Khan
Effect of 3D Printing Process Parameters on Damping Characteristic of Cantilever Beams Fabricated Using Material Extrusion. Polymers 15 (2) (2023)
Mohammed Dukhi Almutairi, Feiyang He, Yousef Lafi Alshammari, Sultan Saleh Alnahdi, Muhammad Ali Khan
Analysis of the Self-Healing Capability of Thermoplastic Elastomer Capsules in a Polymeric Beam Structure Based on Strain Energy Release Behaviour during Crack Growth. Polymers 15 (16) (2023)
Arturo Francese, Muhammad Ali Khan, Feiyang He
Role of Dynamic Response in Inclined Transverse Crack Inspection for 3D-Printed Polymeric Beam with Metal Stiffener. Materials (Basel, Switzerland) 16 (8) (2023)
Feiyang He, Haoran Ning, Muhammad Ali Khan
Effect of 3D Printing Process Parameters on Damping Characteristic of Cantilever Beams Fabricated Using Material Extrusion. Polymers 15 (2) (2023)
Arturo Francese, Muhammad Ali Khan, Feiyang He
Role of Dynamic Response in Inclined Transverse Crack Inspection for 3D-Printed Polymeric Beam with Metal Stiffener. Materials (Basel, Switzerland) 16 (8) (2023)
Feiyang He, Chenyan Xu, Muhammad Ali Khan
Tribological Characterisation and Modelling for the Fused Deposition Modelling of Polymeric Structures under Lubrication Conditions. Polymers 15 (20) (2023)
Intisar Omar, Muhammad Ali Khan, Andrew Starr, Khaled Abou Rok Ba
Automated Prediction of Crack Propagation Using H2O AutoML. Sensors (Basel, Switzerland) 23 (20) (2023)
Arturo Francese, Muhammad Ali Khan, Feiyang He
Role of Dynamic Response in Inclined Transverse Crack Inspection for 3D-Printed Polymeric Beam with Metal Stiffener. Materials (Basel, Switzerland) 16 (8) (2023)
Feiyang He, Haoran Ning, Muhammad Ali Khan
Effect of 3D Printing Process Parameters on Damping Characteristic of Cantilever Beams Fabricated Using Material Extrusion. Polymers 15 (2) (2023)
Feiyang He, Muhammad Ali Khan, Salem M Aldosari
Interdependencies between Dynamic Response and Crack Growth in a 3D-Printed Acrylonitrile Butadiene Styrene (ABS) Cantilever Beam under Thermo-Mechanical Loads. Polymers 14 (5) (2022)
Kevin Lontin, Muhammad Ali Khan, Bander Alharbi
Investigation of the Effect of Temperature on the Wear Rate and Airborne Noise in Sliding Wear. Materials (Basel, Switzerland) 15 (3) (2022)
Mohammed Dukhi Almutairi, Sultan Saleh Alnahdi, Muhammad Ali Khan
Strain Release Behaviour during Crack Growth of a Polymeric Beam under Elastic Loads for Self-Healing. Polymers 14 (15) (2022)
Ayat Adnan Atwah, Mohammed Dukhi Almutairi, Feiyang He, Muhammad Ali Khan
Influence of Printing Parameters on Self-Cleaning Properties of 3D Printed Polymeric Fabrics. Polymers 14 (15) (2022)
Ahmed Abusabir, Muhammad Ali Khan, Muhammad Asif, Kamran A Khan
Effect of Architected Structural Members on the Viscoelastic Response of 3D Printed Simple Cubic Lattice Structures. Polymers 14 (3) (2022)
Khangamlung Kamei, Muhammad Ali Khan
Investigating the Structural Dynamics and Crack Propagation Behavior under Uniform and Non-Uniform Temperature Conditions. Materials (Basel, Switzerland) 14 (22) (2021)
Yousef Lafi A Alshammari, Feiyang He, Muhammad Ali Khan
Modelling and Investigation of Crack Growth for 3D-Printed Acrylonitrile Butadiene Styrene (ABS) with Various Printing Parameters and Ambient Temperatures. Polymers 13 (21) (2021)
Feiyang He, Muhammad Ali Khan
Effects of Printing Parameters on the Fatigue Behaviour of 3D-Printed ABS under Dynamic Thermo-Mechanical Loads. Polymers 13 (14) (2021)
Ali Rahman, Muhammad Ali Khan, Aleem Mushtaq
Predictive Modeling of Surface Wear in Mechanical Contacts under Lubricated and Non-Lubricated Conditions. Sensors (Basel, Switzerland) 21 (4) (2021)
Samuel Chukwuemeka Olisa, Muhammad Ali Khan, Andrew Starr
Review of Current Guided Wave Ultrasonic Testing (GWUT) Limitations and Future Directions. Sensors (Basel, Switzerland) 21 (3) (2021)
Salem Mohammed Aldosari, Muhammad Ali Khan, Sameer Rahatekar
Manufacturing Pitch and Polyethylene Blends-Based Fibres as Potential Carbon Fibre Precursors. Polymers 13 (9) (2021)
Sultan Al Hassanieh, Ahmed Alhantoobi, Kamran A Khan, Muhammad Ali Khan
Mechanical Properties and Energy Absorption Characteristics of Additively Manufactured Lightweight Novel Re-Entrant Plate-Based Lattice Structures. Polymers 13 (22) (2021)
Kevin Lontin, Muhammad Ali Khan
Wear and Airborne Noise Interdependency at Asperitical Level: Analytical Modelling and Experimental Validation. Materials (Basel, Switzerland) 14 (23) (2021)
Mubarak Alotaibi, Barmak Honarvar Shakibaei Asli, Muhammad Ali Khan
Non-Invasive Inspections: A Review on Methods and Tools. Sensors (Basel, Switzerland) 21 (24) (2021)
Thomas Fleet, Khangamlung Kamei, Feiyang He, Muhammad Ali Khan, Kamran A Khan, Andrew Starr
A Machine Learning Approach to Model Interdependencies between Dynamic Response and Crack Propagation. Sensors (Basel, Switzerland) 20 (23) (2020)
Hamzah Baqasah, Feiyang He, Behzad A Zai, Muhammad Asif, Kamran A Khan, Vijay Kumar Thakur, Muhammad Ali Khan
In-Situ Dynamic Response Measurement for Damage Quantification of 3D Printed ABS Cantilever Beam under Thermomechanical Load. Polymers 11 (12) (2019)

Muhammad Ali Khan.css-eqlu8i{font-size:small;padding-left:4px;} (Muhammad Khan, Muhammad A Khan)

Publication Activity (10 Years)

Top Topics

Top Venues

Muhammad Ali Khan (Muhammad Khan, Muhammad A Khan)