Sergey V Panin (Sergey Panin)

ResearcherID Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2024
Publications (10 Years): 33

Top Venues

Polymers

Materials (Basel, Switzerland)

International journal of molecular sciences

Sensors (Basel, Switzerland)

Institute of Strength Physics and Materials Sciences SB RAS

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Institute of Strength Physics and Materials Sciences SB RAS Jul 15 1993

Russia

Deputy director on research :: Mechanics Composite Polimer Materials lab.

Publications

Alexey A Bogdanov, Sergey V Panin
Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents. Polymers 16 (6) (2024)
Dmitry Yu Stepanov, Defang Tian, Vladislav O Alexenko, Sergey V Panin, Dmitry G Buslovich
Application of Neural Network Models with Ultra-Small Samples to Optimize the Ultrasonic Consolidation Parameters for 'PEI Adherend/Prepreg (CF-PEI Fabric)/PEI Adherend' Lap Joints. Polymers 16 (4) (2024)
Alexey A Bogdanov, Sergey V Panin
Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents. Polymers 16 (6) (2024)
Defang Tian, Changjun He, Dmitry G Buslovich, Lyudmila A Kornienko, Sergey V Panin
The Role of Triboloading Conditions in Tribolayer Formation and Wear Resistance of PES-Based Composites Reinforced with Carbon Fibers. Polymers 16 (15) (2024)
Dmitry Yu Stepanov, Defang Tian, Vladislav O Alexenko, Sergey V Panin, Dmitry G Buslovich
Application of Neural Network Models with Ultra-Small Samples to Optimize the Ultrasonic Consolidation Parameters for 'PEI Adherend/Prepreg (CF-PEI Fabric)/PEI Adherend' Lap Joints. Polymers 16 (4) (2024)
Yuanyi Shen, Dmitry G Buslovich, Sergey V Panin, Lyudmila A Kornienko, Pavel V Dobretsov, Yury M Kolobov
Tribological Characteristics of Fibrous Polyphthalamide-Based Composites. Polymers 16 (16) (2024)
Alexey A Bogdanov, Sergey V Panin
Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents. Polymers 16 (6) (2024)
Defang Tian, Changjun He, Dmitry G Buslovich, Lyudmila A Kornienko, Sergey V Panin
The Role of Triboloading Conditions in Tribolayer Formation and Wear Resistance of PES-Based Composites Reinforced with Carbon Fibers. Polymers 16 (15) (2024)
Sergey V Panin, Alexey A Bogdanov, Alexander V Eremin, Dmitry G Buslovich, Ivan S Shilko
Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue. Polymers 15 (5) (2023)
Pavel V Kosmachev, Sergey V Panin, Iliya L Panov, Svetlana A Bochkareva
Structure and Deformation Behavior of Polyphenylene Sulfide-Based Laminates Reinforced with Carbon Fiber Tapes Activated by Cold Atmospheric Plasma. Polymers 16 (1) (2023)
Sergey V Panin, Alexey A Bogdanov, Alexander V Eremin, Dmitry G Buslovich, Ivan S Shilko
Effect of Polymer Matrix on Inelastic Strain Development in PI- and PEI-Based Composites Reinforced with Short Carbon Fibers under Low-Cyclic Fatigue. Polymers 15 (5) (2023)
Dmitry I Grachev, Evgeny A Chizhmakov, Dmitry Yu Stepanov, Dmitry G Buslovich, Ibragim V Khulaev, Aslan V Deshev, Levon G Kirakosyan, Anatoly S Arutyunov, Svetlana Yu Kardanova, Konstantin S Panin, Sergey V Panin
Dental Material Selection for the Additive Manufacturing of Removable Complete Dentures (RCD). International journal of molecular sciences 24 (7) (2023)
Vladislav O Alexenko, Sergey V Panin, Dmitry Yu Stepanov, Anton V Byakov, Alexey A Bogdanov, Dmitry G Buslovich, Konstantin S Panin, Defang Tian
Ultrasonic Welding of PEEK Plates with CF Fabric Reinforcement-The Optimization of the Process by Neural Network Simulation. Materials (Basel, Switzerland) 16 (5) (2023)
Dmitry G Buslovich, Sergey V Panin, Jiangkun Luo, Ksenya N Pogosyan, Vladislav O Alexenko, Lyudmila A Kornienko
Influence of the Matrix Material and Tribological Contact Type on the Antifriction Properties of Hybrid Reinforced Polyimide-Based Nano- and Microcomposites. Polymers 15 (15) (2023)
Vladislav O Alexenko, Sergey V Panin, Dmitry Yu Stepanov, Anton V Byakov, Alexey A Bogdanov, Dmitry G Buslovich, Konstantin S Panin, Defang Tian
Ultrasonic Welding of PEEK Plates with CF Fabric Reinforcement-The Optimization of the Process by Neural Network Simulation. Materials (Basel, Switzerland) 16 (5) (2023)
Dmitry I Grachev, Igor V Zolotnitsky, Dmitry Yu Stepanov, Alexander A Kozulin, Magomet Sh Mustafaev, Aslan V Deshev, Dmitriy S Arutyunov, Islam V Tlupov, Sergey V Panin, Sergey D Arutyunov
Ranking Technologies of Additive Manufacturing of Removable Complete Dentures by the Results of Their Mechanical Testing. Dentistry journal 11 (11) (2023)
Pavel V Kosmachev, Sergey V Panin, Iliya L Panov, Svetlana A Bochkareva
Structure and Deformation Behavior of Polyphenylene Sulfide-Based Laminates Reinforced with Carbon Fiber Tapes Activated by Cold Atmospheric Plasma. Polymers 16 (1) (2023)
Dmitry I Grachev, Nurmukhamet S Ruzuddinov, Anatoliy S Arutyunov, Gadzhi D Akhmedov, Lubov V Dubova, Yaser N Kharakh, Sergey V Panin, Sergey D Arutyunov
Algorithm for Designing a Removable Complete Denture (RCD) Based on the FEM Analysis of Its Service Life. Materials (Basel, Switzerland) 15 (20) (2022)
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Lyudmila A Kornienko, Anton V Byakov, Vitaly N Paimushin, Artur R Shugurov
Role of Testing Conditions in Formation of Tribological Layers at Line Contacts of Antifriction CF-Reinforced PI- and PEI-Based Composites. Molecules (Basel, Switzerland) 27 (19) (2022)
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Filippo Berto, Lyudmila A Kornienko
Effect of Transfer Film on Tribological Properties of Anti-Friction PEI- and PI-Based Composites at Elevated Temperatures. Polymers 14 (6) (2022)
Sergey V Panin, Alexey A Bogdanov, Alexander V Eremin, Dmitry G Buslovich, Vladislav O Alexenko
Estimating Low- and High-Cyclic Fatigue of Polyimide-CF-PTFE Composite through Variation of Mechanical Hysteresis Loops. Materials (Basel, Switzerland) 15 (13) (2022)
Sergey V Panin, Vladislav O Alexenko, Dmitry G Buslovich
High Performance Polymer Composites: A Role of Transfer Films in Ensuring Tribological Properties-A Review. Polymers 14 (5) (2022)
Pavel V Kosmachev, Sergey V Panin, Iliya L Panov, Svetlana A Bochkareva
Surface Modification of Carbon Fibers by Low-Temperature Plasma with Runaway Electrons for Manufacturing PEEK-Based Laminates. Materials (Basel, Switzerland) 15 (21) (2022)
Alexey A Bogdanov, Sergey V Panin, Pavel S Lyubutin, Alexander V Eremin, Dmitry G Buslovich, Anton V Byakov
An Automated Optical Strain Measurement System for Estimating Polymer Degradation under Fatigue Testing. Sensors (Basel, Switzerland) 22 (16) (2022)
Sergey V Panin, Dmitry Yu Stepanov, Anton V Byakov
Optimizing Ultrasonic Welding Parameters for Multilayer Lap Joints of PEEK and Carbon Fibers by Neural Network Simulation. Materials (Basel, Switzerland) 15 (19) (2022)
Sergey V Panin, Jiangkun Luo, Dmitry G Buslovich, Vladislav O Alexenko, Lyudmila A Kornienko, Svetlana A Bochkareva, Anton V Byakov
Experimental-FEM Study on Effect of Tribological Load Conditions on Wear Resistance of Three-Component High-Strength Solid-Lubricant PI-Based Composites. Polymers 13 (16) (2021)
Sergey V Panin, Duc A Nguyen, Dmitry G Buslovich, Vladislav O Alexenko, Aleksander V Pervikov, Lyudmila A Kornienko, Filippo Berto
Effect of Various Type of Nanoparticles on Mechanical and Tribological Properties of Wear-Resistant PEEK + PTFE-Based Composites. Materials (Basel, Switzerland) 14 (5) (2021)
Pavel V Kosmachev, Vladislav O Alexenko, Svetlana A Bochkareva, Sergey V Panin
Deformation Behavior and Fracture Patterns of Laminated PEEK- and PI-Based Composites with Various Carbon-Fiber Reinforcement. Polymers 13 (14) (2021)
Sergey V Panin, Dmitry G Buslovich, Yuri V Dontsov, Svetlana A Bochkareva, Lyudmila A Kornienko, Filippo Berto
UHMWPE-Based Glass-Fiber Composites Fabricated by FDM. Multiscaling Aspects of Design, Manufacturing and Performance. Materials (Basel, Switzerland) 14 (6) (2021)
Sergey V Panin, Lyudmila A Kornienko, Qitao Huang, Dmitry G Buslovich, Svetlana A Bochkareva, Vladislav O Alexenko, Iliya L Panov, Filippo Berto
Effect of Adhesion on Mechanical and Tribological Properties of Glass Fiber Composites, Based on Ultra-High Molecular Weight Polyethylene Powders with Various Initial Particle Sizes. Materials (Basel, Switzerland) 13 (7) (2020)
Sergey V Panin, Lyudmila A Kornienko, Vladislav O Alexenko, Dmitry G Buslovich, Svetlana A Bochkareva, Boris A Lyukshin
Increasing Wear Resistance of UHMWPE by Loading Enforcing Carbon Fibers: Effect of Irreversible and Elastic Deformation, Friction Heating, and Filler Size. Materials (Basel, Switzerland) 13 (2) (2020)
Yury V Dontsov, Sergey V Panin, Dmitry G Buslovich, Filippo Berto
Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites. Materials (Basel, Switzerland) 13 (12) (2020)
Volodymyr Hutsaylyuk, Pavlo Maruschak, Ihor Konovalenko, Sergey V Panin, Roman Bishchak, Mykola Chausov
Mechanical Properties of Gas Main Steels after Long-Term Operation and Peculiarities of Their Fracture Surface Morphology. Materials (Basel, Switzerland) 12 (3) (2019)

Sergey V Panin.css-eqlu8i{font-size:small;padding-left:4px;} (Sergey Panin)

Publication Activity (10 Years)

Top Topics

Top Venues

Sergey V Panin (Sergey Panin)