Tomasz Czujko

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2018-2024
Publications (10 Years): 21

Top Venues

Materials (Basel, Switzerland)

Military University of Technology in Warsaw

Military University of Technology in Warsaw (PHD)

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Military University of Technology in Warsaw Sep 01 2019

Poland

Director of Institute/Professor :: Institute of Materials Science and Engineering

Education History

Military University of Technology in Warsaw Jul 09 2009

Poland

PHD :: Department of Advanced Materials and Technologies

Military University of Technology in Warsaw Jan 15 1998

Poland

PHD :: Department of Advanced Materials and Technologies

Publications

Anna Antolak-Dudka, Tomasz Czujko, Tomasz Durejko, Wojciech J Stępniowski, Michał Ziętala, Justyna Łukasiewicz
Comparison of the Microstructural, Mechanical and Corrosion Resistance Properties of Ti6Al4V Samples Manufactured by LENS and Subjected to Various Heat Treatments. Materials (Basel, Switzerland) 17 (5) (2024)
Daniel Gajda, Michał Babij, Andrzej J Zaleski, Doğan Avci, Fırat Karaboga, Hakan Yetis, Ibrahim Belenli, Tomasz Czujko
Investigation of Layered Structure Formation in MgB 2 Wires Produced by the Internal Mg Coating Process under Low and High Isostatic Pressures. Materials (Basel, Switzerland) 17 (6) (2024)
Daniel Gajda, Michał Babij, Andrzej J Zaleski, Doğan Avci, Fırat Karaboga, Hakan Yetis, Ibrahim Belenli, Tomasz Czujko
Investigation of Layered Structure Formation in MgB 2 Wires Produced by the Internal Mg Coating Process under Low and High Isostatic Pressures. Materials (Basel, Switzerland) 17 (6) (2024)
Anna Antolak-Dudka, Tomasz Czujko, Tomasz Durejko, Wojciech J Stępniowski, Michał Ziętala, Justyna Łukasiewicz
Comparison of the Microstructural, Mechanical and Corrosion Resistance Properties of Ti6Al4V Samples Manufactured by LENS and Subjected to Various Heat Treatments. Materials (Basel, Switzerland) 17 (5) (2024)
Anna Antolak-Dudka, Tomasz Czujko, Tomasz Durejko, Wojciech J Stępniowski, Michał Ziętala, Justyna Łukasiewicz
Comparison of the Microstructural, Mechanical and Corrosion Resistance Properties of Ti6Al4V Samples Manufactured by LENS and Subjected to Various Heat Treatments. Materials (Basel, Switzerland) 17 (5) (2024)
Tomasz Czujko, Daniel Gajda, Matt Rindfleisch, Michał Babij, Andrzej J Zaleski
Effect of Low Annealing Temperature on the Critical-Current Density of 2% C-Doped MgB 2 Wires Used in Superconducting Coils with the Wind-and-React (W&R) Method-High-Field and High-Temperature Pinning Centers. Materials (Basel, Switzerland) 16 (18) (2023)
Daniel Gajda, Andrzej J Zaleski, Andrzej J Morawski, Małgorzata Małecka, Lan Maria Tran, Matt Rindfleisch, Tomasz Durejko, Tomasz Czujko
High Critical Current Density in the Textured Nanofiber Structure in Multifilament MgB 2 Wires Made by the Powder-In-Tube (PIT) Technique. Materials (Basel, Switzerland) 15 (15) (2022)
Daniel Gajda, Andrzej J Zaleski, Andrzej Morawski, Małgorzata Małecka, Mustafa Akdoğan, Firat Karaboğa, Doğan Avci, Hakan Yetiş, Ibrahim Belenli, Tomasz Czujko
Influence of Amorphous Boron Grain Size, High Isostatic Pressure, Annealing Temperature, and Filling Density of Unreacted Material on Structure, Critical Parameters, N-Value, and Engineering Critical Current Density in Mgb2 Wires. Materials (Basel, Switzerland) 14 (13) (2021)
Daniel Gajda, Andrzej J Zaleski, Andrzej J Morawski, Malgorzata Małecka, Konstantin Nenkov, Matt Rindfleisch, Md Shahriar A Hossain, Tomasz Czujko
Effect of Heat Treatments under High Isostatic Pressure on the Transport Critical Current Density at 4.2 K and 20 K in Doped and Undoped MgB2 Wires. Materials (Basel, Switzerland) 14 (18) (2021)
Paweł Smoleń, Tomasz Czujko, Zenon Komorek, Dominik Grochala, Anna Rutkowska, Małgorzata Osiewicz-Powęzka
Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes. Materials (Basel, Switzerland) 14 (12) (2021)
Paulina Chilimoniuk, Robert P Socha, Tomasz Czujko
Nanoporous Anodic Aluminum-Iron Oxide with a Tunable Band Gap Formed on the FeAl3 Intermetallic Phase. Materials (Basel, Switzerland) 13 (16) (2020)
Jan Dutkiewicz, Łukasz Rogal, Damian Kalita, Katarzyna Berent, Bogdan Antoszewski, Hubert Danielewski, Marek St Węglowski, Magdalena Łazińska, Tomasz Durejko, Tomasz Czujko
Microstructure and Properties of Inconel 625 Fabricated Using Two Types of Laser Metal Deposition Methods. Materials (Basel, Switzerland) 13 (21) (2020)
Damian Kalita, Łukasz Rogal, Piotr Bobrowski, Tomasz Durejko, Tomasz Czujko, Anna Antolak-Dudka, Eduard Cesari, Jan Dutkiewicz
Superelastic Behavior of Ti-Nb Alloys Obtained by the Laser Engineered Net Shaping (LENS) Technique. Materials (Basel, Switzerland) 13 (12) (2020)
Tomasz Durejko, Magdalena Łazińska, Julita Dworecka-Wójcik, Stanisław Lipiński, Robert A Varin, Tomasz Czujko
The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM). Materials (Basel, Switzerland) 12 (9) (2019)
Paulina Chilimoniuk, Marta Michalska-Domańska, Tomasz Czujko
Formation of Nanoporous Mixed Aluminum-Iron Oxides by Self-Organized Anodizing of FeAl3 Intermetallic Alloy. Materials (Basel, Switzerland) 12 (14) (2019)
Anna Antolak-Dudka, Paweł Płatek, Tomasz Durejko, Paweł Baranowski, Jerzy Malachowski, Marcin Sarzyński, Tomasz Czujko
Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENSTM) Technology. Materials (Basel, Switzerland) 12 (8) (2019)
Maria Sozańska, Adrian Mościcki, Tomasz Czujko
The Characterization of Stress Corrosion Cracking in the AE44 Magnesium Casting Alloy Using Quantitative Fractography Methods. Materials (Basel, Switzerland) 12 (24) (2019)
Krzysztof Karczewski, Tomasz Durejko, Tomasz Czujko
The Microstructure Evolution of a Fe₃Al Alloy during the LENS Process. Materials (Basel, Switzerland) 11 (3) (2018)
Tomasz Durejko, Justyna Aniszewska, Michał Ziętala, Anna Antolak-Dudka, Tomasz Czujko, Robert A Varin, Vlad Paserin
The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique. Materials (Basel, Switzerland) 11 (5) (2018)
Radosław Łyszkowski, Wojciech Polkowski, Tomasz Czujko
Severe Plastic Deformation of Fe-22Al-5Cr Alloy by Cross-Channel Extrusion with Back Pressure. Materials (Basel, Switzerland) 11 (11) (2018)
Magdalena Łazińska, Tomasz Durejko, Tomasz Czujko, Zbigniew Bojar
The Effect of the Traverse Feed Rate on the Microstructure and Mechanical Properties of Laser Deposited Fe₃Al (Zr,B) Intermetallic Alloy. Materials (Basel, Switzerland) 11 (5) (2018)

Tomasz Czujko.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Tomasz Czujko