Victor Songmene

Publication Activity (10 Years)

Years Active: 2022-2024
Publications (10 Years): 18

Top Topics

Aqueous Solution

Room Temperature

Polycyclic Aromatic Hydrocarbons

Electron Microscopy

Top Venues

Materials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Wael Mateur, Victor Songmene, Jules Kouam
Experimental Investigation on the Effects of Tool Geometry and Cutting Conditions on Machining Behavior during Edge Finishing of Granite Using Concave and Chamfered Profiling Tools. Micromachines 15 (3) (2024)
Wael Mateur, Victor Songmene, Jules Kouam
Experimental Investigation on the Effects of Tool Geometry and Cutting Conditions on Machining Behavior during Edge Finishing of Granite Using Concave and Chamfered Profiling Tools. Micromachines 15 (3) (2024)
Agnes M Samuel, Ehab Samuel, Victor Songmene, Fawzy H Samuel
A Review on Porosity Formation in Aluminum-Based Alloys. Materials (Basel, Switzerland) 16 (5) (2023)
Agnes M Samuel, Ehab Samuel, Victor Songmene, Fawzy H Samuel
A Review on Porosity Formation in Aluminum-Based Alloys. Materials (Basel, Switzerland) 16 (5) (2023)
Lida Radan, Victor Songmene, Yasser Zedan, Fawzy H Samuel
Investigating the Effect of Heat Treatment on the Microstructure and Hardness of Aluminum-Lithium Alloys. Materials (Basel, Switzerland) 16 (19) (2023)
Ehab Samuel, Agnes M Samuel, Victor Songmene, Fawzy H Samuel
A Review on the Analysis of Thermal and Thermodynamic Aspects of Grain Refinement of Aluminum-Silicon-Based Alloys. Materials (Basel, Switzerland) 16 (16) (2023)
Abram Girgis, Ehab Samuel, Agnes M Samuel, Victor Songmene, Fawzy H Samuel
Effect of Cu Content on the Alloy Tensile Properties of Al-Cu Based Alloys Tested at 25 °C and 250 °C: Application of the Concept of Quality Index. Materials (Basel, Switzerland) 16 (4) (2023)
Agnes M Samuel, Ehab Samuel, Victor Songmene, Fawzy H Samuel
A Comparative Study of Grain Refining of Al-(7-17%) Si Cast Alloys Using Al-10% Ti and Al-4% B Master Alloys. Materials (Basel, Switzerland) 16 (7) (2023)
Ali Tahmasbi, Fawzy H Samuel, Yasser Zedan, Victor Songmene, Fawzy H Samuel
Effect of Aging Treatment on the Strength and Microstructure of 7075-Based Alloys Containing 2% Li and/or 0.12% Sc. Materials (Basel, Switzerland) 16 (23) (2023)
Abram Girgis, Ehab Samuel, Agnes M Samuel, Victor Songmene, Fawzy H Samuel
Effect of Cu Content on the Alloy Tensile Properties of Al-Cu Based Alloys Tested at 25 °C and 250 °C: Application of the Concept of Quality Index. Materials (Basel, Switzerland) 16 (4) (2023)
Abram Girgis, Ehab Samuel, Agnes M Samuel, Victor Songmene, Fawzy H Samuel
Effect of Cu Content on the Alloy Tensile Properties of Al-Cu Based Alloys Tested at 25 °C and 250 °C: Application of the Concept of Quality Index. Materials (Basel, Switzerland) 16 (4) (2023)
Haithem Bahri, Victor Songmene, Jules Kouam
Experimental Investigation on Part Quality and Dust Emission during Minimum Quantity Lubricated (MQL) Edge Finishing of Granite. Micromachines 13 (10) (2022)
Yasser Zedan, Victor Songmene, Agnes M Samuel, Fawzy H Samuel, Herbert W Doty
Assessment of the Influence of Additives on the Mechanical Properties and Machinability of Al-11%Si Cast Alloys: Application of DOE and ANOVA Methods. Materials (Basel, Switzerland) 15 (9) (2022)
Mohamed H Abdelaziz, Agnes M Samuel, Herbert W Doty, Victor Songmene, Fawzy H Samuel
Mechanical Performance and Precipitation Behavior in Al-Si-Cu-Mg Cast Alloys: Effect of Prolonged Thermal Exposure. Materials (Basel, Switzerland) 15 (8) (2022)
Shimaa El-Hadad, Agnes M Samuel, Fawzy H Samuel, Herbert W Doty, Victor Songmene
Effect of Bi and Ca on the Solidification Parameters of Sr-Modified Al-S-Cu (Mg) Alloys. Materials (Basel, Switzerland) 15 (19) (2022)
Ehab Samuel, Ahmed M Nabawy, Agnes M Samuel, Herbert W Doty, Victor Songmene, Fawzy H Samuel
Effect of Zr and Ti Addition and Aging Treatment on the Microstructure and Tensile Properties of Al-2%Cu-Based Alloys. Materials (Basel, Switzerland) 15 (13) (2022)
Zakaria Ahmed M Tagiuri, Thien-My Dao, Agnes Marie Samuel, Victor Songmene
A Numerical Model for Predicting the Effect of Tool Nose Radius on Machining Process Performance during Orthogonal Cutting of AISI 1045 Steel. Materials (Basel, Switzerland) 15 (9) (2022)
Jules Kouam, Victor Songmene, Ali Bahloul, Agnes M Samuel
Characterization of Si and SiO 2 in Dust Emitted during Granite Polishing as a Function of Cutting Conditions. Materials (Basel, Switzerland) 15 (11) (2022)