Wojciech Zębala

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2024
Publications (10 Years): 16

Top Venues

Materials (Basel, Switzerland)

Cracow University of Technology

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Cracow University of Technology

Poland

Head of Chair :: Institute of Production Engineering/Chair of Machine and Tool Technology

Publications

Emilia Franczyk, Wojciech Zębala
Impact of Cutting Data on Cutting Forces, Surface Roughness, and Chip Type in Order to Improve the Tool Operation Reliability in Sintered Cobalt Turning. Materials (Basel, Switzerland) 17 (10) (2024)
Magdalena Machno, Wojciech Zębala
Comparative Study of the Dimensional and Shape Accuracy of Parts Made of 316L Manufactured Using the SLM and Casting Methods after Milling and WEDM. Materials (Basel, Switzerland) 17 (12) (2024)
Magdalena Machno, Wojciech Zębala
Comparative Study of the Dimensional and Shape Accuracy of Parts Made of 316L Manufactured Using the SLM and Casting Methods after Milling and WEDM. Materials (Basel, Switzerland) 17 (12) (2024)
Emilia Franczyk, Wojciech Zębala
Impact of Cutting Data on Cutting Forces, Surface Roughness, and Chip Type in Order to Improve the Tool Operation Reliability in Sintered Cobalt Turning. Materials (Basel, Switzerland) 17 (10) (2024)
Ksenia Latosińska, Grzegorz Struzikiewicz, Wojciech Zębala
Method of Data Selection for Turning of Inconel 718 Alloy Obtained by Casting and Laser Sintering Powder. Materials (Basel, Switzerland) 15 (4) (2022)
Magdalena Machno, Emilia Franczyk, Rafał Bogucki, Andrzej Matras, Wojciech Zębala
A Comparative Study on the Structure and Quality of SLM and Cast AISI 316L Samples Subjected to WEDM Processing. Materials (Basel, Switzerland) 15 (3) (2022)
Emilia Franczyk, Wojciech Zębala
Optimization of Titanium Alloy Drilling to Minimize the Secondary Burr after Deburring Process. Materials (Basel, Switzerland) 15 (23) (2022)
Emilia Franczyk, Wojciech Zębala
Optimization of Titanium Alloy Drilling to Minimize the Secondary Burr after Deburring Process. Materials (Basel, Switzerland) 15 (23) (2022)
Emilia Franczyk, Wojciech Zębala
Optimization of Titanium Alloy Drilling to Minimize the Secondary Burr after Deburring Process. Materials (Basel, Switzerland) 15 (23) (2022)
Wojciech Zębala, Grzegorz Struzikiewicz, Ksenia Rumian
Cutting Forces and Tool Wear Investigation during Turning of Sintered Nickel-Cobalt Alloy with CBN Tools. Materials (Basel, Switzerland) 14 (7) (2021)
Emilia Franczyk, Magdalena Machno, Wojciech Zębala
Investigation and Optimization of the SLM and WEDM Processes' Parameters for the AlSi10Mg-Sintered Part. Materials (Basel, Switzerland) 14 (2) (2021)
Emilia Franczyk, Łukasz Ślusarczyk, Wojciech Zębala
Drilling Burr Minimization by Changing Drill Geometry. Materials (Basel, Switzerland) 13 (14) (2020)
Wojciech Zębala, Grzegorz Struzikiewicz, Bogdan Słodki
Reduction of Power Consumption by Chip Breakability Control in Ti6Al4V Titanium Alloy Turning. Materials (Basel, Switzerland) 13 (11) (2020)
Andrzej Matras, Wojciech Zębala
Optimization of Cutting Data and Tool Inclination Angles During Hard Milling with CBN Tools, Based on Force Predictions and Surface Roughness Measurements. Materials (Basel, Switzerland) 13 (5) (2020)
Balázs Mikó, Bálint Varga, Wojciech Zębala
The Effect of the Feed Direction on the Micro- and Macro Accuracy of 3D Ball-end Milling of Chromium-Molybdenum Alloy Steel. Materials (Basel, Switzerland) 12 (24) (2019)
Bogdan Słodki, Wojciech Zębala, Grzegorz Struzikiewicz
Turning Titanium Alloy, Grade 5 ELI, With the Implementation of High Pressure Coolant. Materials (Basel, Switzerland) 12 (5) (2019)

Wojciech Zębala.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Wojciech Zębala