Mesoporous TiO 2 and Fe-containing TiO 2 prepared by solution combustion synthesis as catalysts for the photodegradation of paracetamol.

Water pollution due to emerging contaminants, e.g., pharmaceuticals, is one of the most frequently discussed issues. Among them, paracetamol received great attention due to its physico-chemical properties, persistence, and adverse environmental effects. Different techniques were employed for its degradation and, among them, photodegradation is considered one of the most suitable to pursue the aim. This work aimed to synthesize mesoporous TiO 2 , even with the presence of iron, through a one-pot method, with an enhanced ability to abate paracetamol. Precisely, pure and iron-containing (3.5 wt%) TiO 2 were successfully obtained employing an uncommon procedure for this kind of material, mainly solution combustion synthesis (SCS). Moreover, a traditional hydrothermal method and a commercial Degussa P25 were also investigated for comparison purposes. The samples were characterized through N 2 -physisorption at - 196 °C, XRD, XPS, EDX, DR UV-Vis, and FESEM analysis. The catalytic activity was investigated for the abatement of 10 ppm of paracetamol, under UV irradiation in acidic conditions (pH = 3) and in the presence of H 2 O 2 . As a whole, the best-performing catalysts were those obtained through the SCS procedure, highlighting a complete removal of the organic pollutant after 1 h in the case of Fe/TiO 2 _SCS, thanks to its highly defective structure and the presence of metal Fe. To better investigate the performance of both pure and Fe-containing SCS samples, further oxidation tests were performed at pH = 7 and in the absence of H 2 O 2 . Noteworthy, in these conditions, the two samples exhibited different behaviors, highlighting different mechanisms depending on the presence or absence of iron in the structure. Finally, a kinetic study was conducted, demonstrating that a first order is suitable for its abatement.