Fabrication and electrical properties of printed three-dimensional integrated carbon nanotube PMOS inverters on flexible substrates.

The low resolution of current printing technology (usually 10-100 μm) limits the number of printed thin film transistors (TFTs) per processable area, resulting in the low integration of printed circuits. In this work, we developed a three-dimensional (3D) integration technology to increase the integration of printed TFTs and firstly achieved printed 3D single-walled carbon nanotube (SWCNT) PMOS inverter arrays on the flexible substrates. The flexible 3D PMOS inverter consists of a bottom-gate SWCNT TFT ( i.e. , a driving TFT) and a top-gate SWCNT TFT ( i.e. , a load TFT). Printed SWCNT TFTs exhibited good electrical properties with high carrier mobility (up to 9.53 cm 2 V -1 s -1 ), high I on / I off ratio (10 5 -10 6 ), low hysteresis, and small subthreshold swing (SS) (70-80 mV dec -1 ). As-prepared 3D PMOS inverters exhibited rail-to-rail voltage output characteristics, high voltage gain (10) at a low operating voltage ( V DD < 1 V), and good mechanical flexibility. Furthermore, the printed 3D PMOS inverters could be utilized to detect ammonia gases, exhibiting satisfactory stability and recovery rate. It is crucial for realizing high-density, multi-functional printed carbon-based electronic devices and circuits for wearable electronics and the Internet of Things (IoT).