Condensed Layer Deposition of Nanoscopic TiO 2 Overlayers on High-Surface-Area Electrocatalysts.

Encapsulating an electrocatalytic material with a semipermeable, nanoscopic oxide overlayer offers a promising approach to enhancing its stability, activity, and/or selectivity compared to an unencapsulated electrocatalyst. However, applying nanoscopic oxide encapsulation layers to high-surface-area electrodes such as nanoparticle-supported porous electrodes is a challenging task. This study demonstrates that the recently developed condensed layer deposition (CLD) method can be used for depositing nanoscopic (sub-10 nm thick) titanium dioxide (TiO 2 ) overlayers onto high-surface-area platinized carbon foam electrodes. Characterization of the overlayers by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS) showed that the films are amorphous, while X-ray photoelectron spectroscopy confirmed that they exhibit TiO 2 stoichiometry. Electrodes were also characterized by hydrogen underpotential deposition (H upd ) and carbon monoxide (CO) stripping, demonstrating that the Pt electrocatalysts remain electrochemically active after encapsulation. Additionally, copper underpotential deposition (Cu upd ) measurements revealed that TiO 2 overlayers are effective at blocking Cu 2+ from reaching the TiO 2 /Pt buried interface and were used to estimate that between 43 and 98% of Pt surface sites were encapsulated. Overall, this study shows that CLD is a promising approach for depositing nanoscopic protective overlayers on high-surface-area electrodes.