Manipulation of Charge Transport in MoS 2 /MoTe 2 Field Effect Transistors and Heterostructure by Propagating the Surface Acoustic Wave.

Two-dimensional (2D) materials with atomic-scale thickness are promising candidates to develop next-generation electronic and optoelectronic devices with multiple functions due to their widely tunable physical properties by various stimuli. The surface acoustic wave (SAW) produced at the surface of the piezoelectrical substrate can generate electrical and strain fields simultaneously with micro/nanometer resolution during propagation. It provides a stable and wireless platform to manipulate the rich and fascinating properties of 2D materials. However, the interaction mechanisms between the SAW and 2D materials remain unclear, preventing further development and potential applications of SAW-integrated 2D devices. This work studied the acoustoelectric (AE) charge transport mechanism in 2D materials thoroughly by characterizing the performances of the n-type MoS 2 and p-type MoTe 2 field effect transistors (FETs) and the MoS 2 /MoTe 2 p-n junction driven by the SAW. As compared to the case driven by the static electrical field alone, the SAW drove the electron and hole transport along the same direction as its propagation, and the generated AE current always had the opposite direction to the AE voltage. In the device level, the 2D FETs showed a significantly reduced subthreshold swing up to around 67% when the SAW was used to drive the channel carriers, indicating that the SAW enhanced the on/off switching speed. Moreover, the MoTe 2 /MoS 2 p-n junction showed a tunable photoresponsivity by the power and propagation direction of the SAW. These findings provide a solid foundation to promote future research and potential applications of SAW-driven multifunctional devices based on 2D materials.