Fabrication of Fe-Zr, Co-Zr, and Ni-Zr Catalysts to Boost CNTs Synthesis from Plastic Wastes and the Electrocatalytic Oxygen Evolution Reaction.

The efficient conversion of plastic wastes to high-value carbon materials like carbon nanotubes (CNTs) is one important issue about the rational recycling, reduction, and reuse of solid wastes. Herein, Fe-, Co-, and Ni-Zr catalysts were prepared and used for CNTs synthesis from polyethylene (PE) waste via a two-stage reaction system. At the same time, the effects of the PE/catalyst ratio and reaction temperature on CNTs synthesis have been studied. Compared with Co-Zr and Ni-Zr, Fe-Zr exhibited the best activity in CNTs synthesis from PE, and it achieved the highest CNTs yield of 806.3 mg/g (per gram of Fe-Zr) at 800 °C with a PE/catalyst ratio of 4. Furthermore, the obtained Fe-Zr/CNTs composite exhibited a low overpotential of 267 mV for the electrocatalytic oxygen evolution reaction (OER) at 20 mA/cm 2 in 1 M KOH electrolyte solution, which was 21 mV lower than commercial RuO 2 (288 mV) and 50 mV lower than Fe-Zr (317 mV). It was deduced that the in situ growth of CNTs reduced the charge transfer resistance and improved the electron transport efficiency of the Fe-Zr/CNTs composite, leading to superior activity in the electrocatalytic OER. This work provided detailed information for the preparation of the metal/CNTs composite from plastic wastes, which contributed positively to alleviate the environment and energy crisis.