Surface Modification and Adhesion Mechanism of Isotactic Polypropylene with Low-Energy Electron-Beam Treatments.
Takuya MatsumotoYuka OkumuraMayu IchimuraHiroyuki NakamuraKoji HondaMasafumi ShibaharaTomoko HiranoHiroki YamadaRyuta TanakaIchiro SakaiAtsushi KajiwaraTakashi NishinoPublished in: Langmuir : the ACS journal of surfaces and colloids (2020)
Recently, smaller-size electron-beam (EB) accelerators have offered EB irradiation in laboratory systems. Therefore, polymer surface treatments with low-energy EB have been developed in the past years. For high adhesion strength, low-energy EB treatment is also a promising method in comparison to plasma surface treatment. In the plasma treatment, the mechanism of the effect on the adhesion properties has been proved and the excess treatments led to the formation of a weak boundary layer and reduction of adhesion strength. In contrast, the low-energy EB possesses high penetration ability. In this work, we focused on the surface treatments of isotactic polypropylene (it.PP) with low-energy EB irradiation for adhesion. The dependence of adhesion strength on the absorbed dose of electron beam was evaluated, and the mechanism of electron beam on the adhesion properties was investigated from various perspectives of surface properties and morphology. Compared to that of plasma-treated it.PP, the adhesion strength of it.PP with electron-beam irradiation increased drastically. We proved that the radical was generated in the substrates after electron-beam treatments and would form covalent bonds between adhesives and substrates, which achieved higher adhesion than plasma treatments. In addition, the electron beam reached effectively a deep region from the top surface of the substrates and provided larger adhesion strength.