Strong-Yet-Ductile Eutectic Alloys Employing Cocoon-Like Nanometer-Sized Dislocation Cells.

Eutectic alloys (EAs) with superior fluidity are known to be the easiest to cast into high-quality ingots, making them the alloys of choice for making large-sized structural parts. However, conventional EAs (CEAs) have never reached strength-ductility combinations on par with the best in other alloy categories. Via thermomechanical processing of cast Ni-32.88wt%Fe-9.53wt%Al CEAs, we have produced a cocoon-like nano-meshed (as fine as 26 nm) network of dislocations (CNN-D) via recovery annealing, through the rearrangement of cold-work-accumulated dislocations anchored by dense pre-existing nanoprecipitates. In lieu of traditional plasticity mechanisms such as TWIP and TRIP, the CNN-D is particularly effective in eutectic lamellae with alternating phases, as it instigates nanometer-spaced planar slip bands that not only dynamically refine the microstructure but also transmit from the FCC (face-centred-cubic) layers into the otherwise brittle B2 layers. These additional mechanisms for strengthening and strain hardening sustain stable tensile flow, resulting in a striking elevation of both strength and ductility to outrank not only all previous CEAs, but also the state of the art - additively manufactured eutectic high-entropy alloys. Our CNN-D thus adds a novel microstructural strategy for performance enhancement, especially for compositionally complex alloys that increasingly make use of nanoprecipitates or local chemical order. This article is protected by copyright. All rights reserved.