Multiphase Flow Characteristics in the Classification Process of a Novel Wide Neck Thickener: Experiment and Simulation.

A novel thickening equipment known as a wide neck thickener (WNT) was designed to solve the problem of depending only on gravity settlement of the thickener. The computational fluid dynamics method with the Reynolds stress and the volume of fluid models and the particle image velocimetry experimental method were both applied to investigate the pressure and velocity variation and turbulent characteristics of the WNT under different parameter settings. The results indicate that experiments and simulations are consistent. Under four parameter settings, the axial and tangential velocities decrease to the minimum and then increase from the wall to the center. Under different feed velocity, cone angle, and spigot diameter settings, turbulent kinetic energy k and intensity I decrease from the cylinder to the cone and from the wall to the center; the max k and I correspond to the area near the inlet followed by the cylinder, and k and I in the cone are the smallest. When the classification overflow outlet (COO) diameter is 200 mm, k and I increase rapidly, the max k and I are transferred from near the inlet to near the cylinder wall at the COO, and the k and I near the wall decrease significantly.