Login / Signup

Performance of PVDF Based Membranes with 2D Materials for Membrane Assisted-Crystallization Process.

Mirko FrappaFrancesca MacedonioAnnarosa GugliuzzaWanqin JinEnrico Drioli
Published in: Membranes (2021)
Membrane crystallization (MCr) is a promising and innovative process for the recovery of freshwater from seawater and for the production of salt crystals from the brine streams of desalination plants. In the present work, composite polymeric membranes for membrane crystallization were fabricated using graphene and bismuth telluride inks prepared according to the wet-jet milling (WJM) technology. A comparison between PVDF-based membranes containing a few layers of graphene or bismuth telluride and PVDF-pristine membranes was carried out. Among the 2D composite membranes, PVDF with bismuth telluride at higher concentration (7%) exhibited the highest flux (about 3.9 L∙m-2h-1, in MCr experiments performed with 5 M NaCl solution as feed, and at a temperature of 34 ± 0.2 °C at the feed side and 11 ± 0.2 °C at the permeate side). The confinement of graphene and bismuth telluride in PVDF membranes produced more uniform NaCl crystals with respect to the pristine PVDF membrane, especially in the case of few-layer graphene. All the membranes showed rejection equal to or higher than 99.9% (up to 99.99% in the case of the membrane with graphene). The high rejection together with the good trans-membrane flux confirmed the interesting performance of the process, without any wetting phenomena, at least during the performed crystallization tests.
Keyphrases
  • room temperature
  • walled carbon nanotubes
  • escherichia coli
  • carbon nanotubes
  • drug delivery
  • klebsiella pneumoniae
  • oxide nanoparticles
  • visible light
  • high resolution
  • simultaneous determination