Bryophyte-Bioinspired Nanoporous AAO/C/MgO Composite for Enhanced CO 2 Capture: The Role of MgO.

A composite material composed of anodized aluminum oxide (AAO), carbon (C), and magnesium oxide (MgO) was developed for CO 2 capture applications. Inspired by the bryophyte organism, the AAO/C/MgO composite mirrors two primary features of these species-(1) morphological characteristics and (2) elemental composition-specifically carbon, oxygen, and magnesium. The synthesis process involved two sequential steps: electroanodization of aluminum foil followed by a hydrothermal method using a mixture of glucose and magnesium chloride (MgCl 2 ). The concentration of MgCl 2 was systematically varied as the sole experimental variable across five levels-1 mM, 2 mM, 3 mM, 4 mM, and 5 mM-to investigate the impact of MgO formation on the samples' chemical and physical properties, and consequently, their CO 2 capture efficiency. Thus, scanning electron microscopy analysis revealed the AAO substrate's porous structure, with pore diameters measuring 250 ± 30 nm. The growth of MgO on the AAO substrate resulted in spherical structures, whose diameter expanded from 15 nm ± 3 nm to 1000 nm ± 250 nm with increasing MgCl 2 concentration from the minor to major concentrations explored, respectively. X-ray photoelectron spectroscopy (XPS) analysis indicated that carbon serves as a linking agent between AAO and MgO within the composite. Notably, the composite synthesized with a 4 mM MgCl 2 concentration exhibited the highest CO 2 capture efficiency, as determined by UV-Vis absorbance studies using a sodium carbonate solution as the CO 2 source. This efficiency was quantified with a 'k' constant of 0.10531, significantly higher than those of other studied samples. The superior performance of the 4 mM MgCl 2 sample in CO 2 capture is likely due to the optimal density of MgO structures formed on the sample's surface, enhancing its adsorptive capabilities as suggested by the XPS results.