Black Phosphorus Field-Effect Transistors with Improved Contact via Localized Joule Heating.

Two-dimensional (2D) black phosphorus (BP) is considered an ideal building block for field-effect transistors (FETs) owing to its unique structure and intriguing properties. To achieve high-performance BP-FETs, it is essential to establish a reliable and low-resistance contact between the BP and the electrodes. In this study, we employed a localized Joule heating method to improve the contact between the 2D BP and gold electrodes, resulting in enhanced BP-FET performance. Upon applying a sufficiently large source-drain voltage, the zero-bias conductance of the device increased by approximately five orders of magnitude, and the linearity of the current-voltage curves was also enhanced. This contact improvement can be attributed to the formation of gold phosphide at the interface of the BP and the gold electrodes owing to current-generated localized Joule heat. The fabricated BP-FET demonstrated a high on/off ratio of 4850 and an on-state conductance per unit channel width of 1.25 μS μm -1 , significantly surpassing those of the BP-FETs without electrical annealing. These findings offer a method to achieve a low-resistance BP/metal contact for developing high-performance BP-based electronic devices.