Microdischarge in Flame as a Source-in-Source for Boosted Excitation of Optical Emission of Chromium.

A compact tandem excitation source-in-source was designed by arranging a point discharge (PD) ignited in argon/hydrogen (Ar/H 2 ) flame and utilized for boosted excitation for the optical emission of chromium. Through a tungsten coil (W-coil) electrothermal vaporizer (ETV) located right under the tandem source without any interface for sample introduction, a miniaturized optical emission spectrometer was realized. Because the discharge gaseous atmosphere of PD was activated in the flame, the energy consumption of PD for breaking down discharge gas and maintenance of plasma was greatly saved. In addition, the flame could partially atomize or keep the atomized state of analyte atoms through its reducing environment. Therefore, the excitation capability of the tandem source was greatly improved, owing to the synergistic effect of PD microplasma and Ar/H 2 flame. In addition, part of the analyte was atomized/excited on the W-coil, and thereby, dry, pure, and activated analyte species were released from the W-coil and swept into the tandem source for atomization/excitation. Through the collective effect of W-coil ETV, Ar/H 2 flame, and PD microplasma, analytical sensitivity for Cr was greatly enhanced. Under the optimized conditions, with 10 μL sample solution, a limit of detection of 1.5 μg L -1 and a relative standard deviation of 3.6% (20 μg L -1 , n = 5) were achieved. Its accuracy was demonstrated by successful analysis of several certified reference materials. Owing to the advantages including high sensitivity, compactness, and cost effectiveness, it is promising to facilitate the miniaturized spectrometer for more elements and potential field analytical chemistry.