Charge-Boosting Strategy for Wearable Nanogenerators Enabled by Integrated Piezoelectric/Conductive Nanofibers.

The surface charge density enhancement by incorporating conductive paths into organic/inorganic piezoelectric composites is considered to be an effective way to achieve high-performance piezoelectric nanogenerators (PENGs). However, it is challenging to boost the charge density of aligned piezoelectric nanofibers due to the difficulty in efficiently building well-distributed conductive paths in their dense structure. In this work, a charge boosting strategy was proposed for enhancing the surface charge density of aligned piezoelectric nanofibers, that is, synchronously preparing piezoelectric/conductive hybrid nanofibers to realize the effective conductive paths for transferring the underlying charges to the surface of the PDMS/BaTiO 3 composites. To this end, antimony-doped tin oxide (ATO) conductive nanofibers and barium titanate (BaTiO 3 ) piezoelectric nanofibers with the same preparation conditions were selected and synchronously prepared by the polymer template electrospinning technology, followed by the calcination process. Benefiting from the well-distributed conductive paths for transferring the charges, the open-circuit voltage and short-circuit current of a PENG with 12 wt% ATO in hybrid nanofibers reached 46 V and 14.5 μA (30 kPa pressure), respectively, which were much higher than the pristine BaTiO 3 -based PENG. The high piezoelectric performance of the developed PENGs guaranteed their great potential applications in powering wearable microelectronics and monitoring human activity. This charge boosting strategy via the piezoelectric/conductive hybrid nanofibers may inspire the further development of high-performance energy harvesting technology.