Transparent Conductive Titanium and Fluorine Co-doped Zinc Oxide Films.
Iqra RamzanJoanna BorowiecIvan P ParkinClaire J CarmaltPublished in: ChemPlusChem (2024)
Aerosol-assisted chemical vapor deposition (AACVD) was used to deposit highly transparent and conductive titanium or fluorine-doped and titanium-fluorine co-doped ZnO thin films on glass substrate at 450 °C. All films were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), UV-Vis spectroscopy, scanning electron spectroscopy (SEM), and four-point probe. The films were 600-680 nm thick, crystalline, and highly transparent (80-87 %). The co-doped film consisted of 0.70 at % titanium and 1 at % fluorine, and displayed a charger carrier mobility, charge carrier concentration, and a minimum resistivity of 8.4 cm 2 V -1 s -1 , 3.97×10 20 cm -3 , and 1.69×10 -3 Ω cm, respectively. A band gap of 3.6 eV was observed for the co-doped film. Compared to the undoped and singly doped films, the co-doped film displayed a notably higher structure morphology (more homogenous grains with well-defined boundaries) suitable for transparent conducting oxide applications.
Keyphrases
- quantum dots
- room temperature
- high resolution
- visible light
- highly efficient
- metal organic framework
- positron emission tomography
- reduced graphene oxide
- electron microscopy
- magnetic resonance imaging
- single molecule
- ionic liquid
- computed tomography
- photodynamic therapy
- magnetic resonance
- mass spectrometry
- oxide nanoparticles
- amino acid