Poly(ethylene) Oxide Electrolytes for All-Solid-State Lithium Batteries Using Microsized Silicon/Carbon Anodes with Enhanced Rate Capability and Cyclability.

Silicon (Si) has been widely studied as one of the promising anodes for lithium-ion batteries (LIBs) because of its ultrahigh theoretical specific capacity and low working voltage. However, the poor interfacial stability of silicon against conventional liquid electrolytes has largely impeded its practical use. Therefore, the combination of silicon-based anodes and solid electrolytes has attracted a great deal of attention in recent years. Here, we demonstrate three types of microsized porous silicon/carbon (Si/C) electrodes (i.e., pristine, prelithiated by liquid electrolyte, and preinfiltrated by polymer electrolyte) that are paired with poly(ethylene) oxide (PEO)-based electrolytes for all-solid-state lithium batteries (ASSLBs). We found that when compared with ionic conductivity, the mechanical stability of the PEO electrolyte dominates the electrochemical performance of ASSLBs using Si/C electrodes at elevated temperature. Additionally, both prelithiated and preinfiltrated Si/C electrodes show higher specific capacity in comparison to the pristine electrode, which is attributed to continuous lithium-ion conducting pathways within the electrode and thus improved utilization of active material. Moreover, owing to good interfacial lithium-ion transport in the electrode, a solid-state half-cell with preinfiltrated Si/C electrode and PEO-lithium bis (trifluoromethanesulfonyl)imide electrolyte delivers a specific capacity of ∼1,000 mAh g -1 after 100 cycles under 800 mA g -1 at 60 °C with average Coulombic efficiency >98.9%. This work provides a strategy for rationally designing the microstructure of silicon-based electrodes with solid electrolytes for high-performance all-solid-state lithium batteries.