Delamination of MoS 2 /SiO 2 interfaces under nanoindentation.
Jin KePenghua YingYao DuBo ZouHuarui SunJin ZhangPublished in: Physical chemistry chemical physics : PCCP (2022)
Molybdenum disulphide (MoS 2 ) mounted on silicon dioxide (SiO 2 ) constitutes the fundamental functional components of many nanodevices, but its mechanical properties, which are crucial for the device design and fabrication, remain almost unexplored. Here, the mechanical properties of the multilayer MoS 2 /SiO 2 system are investigated via nanoindentation experiments and molecular dynamics simulations. In terms of the mechanical properties, a comparative study of MoS 2 /SiO 2 and graphene/SiO 2 systems is presented. The MoS 2 /SiO 2 and graphene/SiO 2 systems are found to possess comparable Young's modulus and hardness values, but their mechanical responses and failure modes under indentation are totally different. Interface delamination failure accompanied by ring-like through-thickness cracking is observed in the MoS 2 /SiO 2 system with a relatively thin MoS 2 layer, while no interface separation is found in indentation experiments for the graphene/SiO 2 system using the same layer thickness. The different failure modes observed between the MoS 2 /SiO 2 and graphene/SiO 2 systems can be attributed to the comparable interface adhesion energy but very different bending stiffness values of the MoS 2 and graphene components. Specifically, compared with graphene, the larger bending stiffness of MoS 2 means that a larger bending force is experienced in the indentation process, overcoming the adhesion of the MoS 2 /SiO 2 interface, which makes interface delamination much easier in the MoS 2 /SiO 2 system.