A Flexible and Attachable Colorimetric Film Sensor for the Detection of Gaseous Ammonia.

A cost-effective, simple, flexible, and disposable colorimetric film sensor was constructed for the rapid detection of gaseous ammonia. The sensor was designed to consist of three layers, namely top, middle, and bottom layers of a polymeric elastomer. The bromocresol (BCG) indicator embedded in the middle layer of the film facilitated a change in color of the sensor from yellow-orange to blue upon exposure to gaseous ammonia. The color change was visually observed by the naked eye. The sensitivity of the sensor was verified by a successful detection of gaseous ammonia at concentrations from 4 to 235 ppm within 3 min, and the corresponding visual detection of ammonia gas was at a concentration as low as 11 ppm. The sensor also achieved a selective detection of gaseous ammonia over a variety of alkaline chemicals. The color of the sensor exposed to ammonia reverted from blue to the original yellow-orange upon subsequent exposure to the fume of acetic acid or aeration for 48 h, and it showed reliable performance for the detection of gaseous ammonia even after five repeated uses. The applicability of the sensor was validated by attaching it onto a safety helmet for a simulation of an industrial ammonia gas leak. The results indicated that our colorimetric film sensor is affordable, disposable, and reproducible, and can serve as an effective alternative for simple and rapid recognition of gaseous ammonia in environmental and air quality monitoring as well as in industrial applications.