Thermal Modification of Spruce and Maple Wood for Special Wood Products.

This article presents a proposal of thermal modification of Norway spruce and sycamore maple for special wood products, mainly for musical instruments. Selected physical and acoustical characteristics (PACHs), including the density ( ρ ), dynamic modulus of elasticity along the wood grain ( E L ), specific modulus ( E sp ), speed of sound along the wood grain ( c L ), resonant frequency ( f r ) and acoustic constant ( A ), logarithmic decrement ( ϑ ), loss coefficient ( η ), acoustic conversion efficiency ( ACE ), sound quality factor ( Q ), and the timbre of sound, were evaluated. These two wood species were chosen regarding their use in the production or repair of musical instruments. For the thermal modification, a similar process to the ThermoWood process was chosen. Thermal modification was performed at the temperatures 135 °C, 160 °C and 185 °C. The resonant dynamic method was used to obtain the PACHs. Fast Fourier transform (FFT) was used to analyze the sound produced. The changes in the observed wood properties depended on the treatment temperature. Based on our results of all properties, the different temperature modified wood could find uses in the making of musical instruments or where the specific values of these wood characteristics are required. The mild thermal modification resulted in a decrease in mass, density, and increased speed of sound and dynamic modulus of elasticity at all temperatures of modification. The thermally modified wood showed higher sound radiation and lower loss coefficients than unmodified wood. The modification also influenced the timbre of sound of both wood species.