Practical Approaches to Apply Ultra-Thick Graphite Anode to High-Energy Lithium-Ion Battery: Carbonization and 3-Dimensionalization.

Lithium-ion batteries with ultra-thick electrodes have high energy density and low manufacturing costs because of the reduction of the inactive materials in the same battery volume. However, the partial usage of the full capacity and the low rate capability are caused by poor ionic and electronic conduction. In this work, the effects of two approaches, such as electrode binder carbonization by heat treatment and 3-dimensionalization by the laser structuring of ultra-thick graphite anodes to lithium-ion batteries for high energy density, are investigated. During the heat treatment, the polyvinylidene fluoride (PVDF) binder is carbonized to form fluorinated graphitic carbons, thereby increasing the number of lithium-ion storage sites and the improvement of the electrode capacity by 14% (420 mAh g -1 and 20 mAh cm -2 ). Further, the carbonization improves the rate capability by 31% at 0.1 C by simultaneously reducing the ionic and electronic resistances. Furthermore, after the laser structuring of the carbonized electrode, the areal discharge capacity increases to 50% at the increasing current rates, resulting from drastically improved ionic conduction. In addition to the electrochemical characteristics, these two approaches contribute considerably to the fast wetting of the electrolyte into the ultra-thick electrode. The carbonization and laser structuring of the ultra-thick graphite anodes are practical approaches for high-energy batteries to overcome the thickness limitation.