Prediction of Peak Overpressure of Charge Enveloped by Polymer Matrix Composite: Theoretical Modeling and Experimental Verification.

This study aimed at elucidating some characteristics of the shock wave overpressure generated by a non-traditional layered charge comprising an inner high-energy explosive and an outer polymer matrix composite. Two models for predicting the peak overpressure (Δ p m ) of the charge were established, namely, a model based on the initial parameters of the blast wave, and a model considering the weakening of the explosion energy through the introduction of polymer matrix cladding. The overpressure of a typical layered charge was experimentally measured for model validation. It was found that the difference between the Δ p m predicted by the two models and the experimental data is less than 15.12% and 14.17%, respectively. The model that was established based on the conservation of energy law, is in best agreement with the experimental data under different cladding/charge mass ratios ( α m ). The model that was based on the initial parameters of the blast wave obtained a low predicted value when α m was 0.4-0.8, which is attributed to the non-uniformity of the gas-solid mixture during the explosive dispersion stage.