Login / Signup

Removal of Azo Dyes from Water Using Natural Luffa cylindrica as a Non-Conventional Adsorbent.

Ma Guadalupe Aranda-FigueroaAdriana Rodríguez-TorresAlexis RodríguezGloria Ivette Bolio-LópezDavid Osvaldo Salinas-SánchezDulce Ma Arias-AtaydeRosenberg J RomeroMaria Guadalupe Valladares-Cisneros
Published in: Molecules (Basel, Switzerland) (2024)
Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica ( Lc ) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Q m ), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L -1 Lc and 0.125 g L -1 ADM. The Q m of Lc was 161.29 mg g -1 . Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.
Keyphrases
  • aqueous solution
  • simultaneous determination
  • solid phase extraction
  • electron microscopy
  • heavy metals
  • mass spectrometry
  • risk assessment
  • liquid chromatography
  • health risk
  • gas chromatography