Enhanced Thermal Conductivities of Liquid Crystal Polyesters from Controlled Structure of Molecular Chains by Introducing Different Dicarboxylic Acid Monomers.

Enhancing thermal conductivity coefficient ( λ ) of liquid crystal polyesters would further widen their application in electronics and electricals. In this work, a kind of biphenyl-based dihydroxy monomer is synthesized using 4, 4'-biphenyl (BP) and triethylene glycol (TEG) as raw material, which further reacts with three different dicarboxylic acids (succinic acid, p-phenylenediacetic acid, and terephthalic acid, respectively) by melt polycondensation to prepare intrinsically highly thermally conductive poly 4', 4"'-[1, 2-ethanediyl-bis(oxy-2, 1-ethanediyloxy)]-bis(p-hydroxybiphenyl) succinate (PEOS), poly 4', 4"'-[1, 2-ethanediyl-bis(oxy-2, 1-ethanediyloxy)]-bis(p-hydroxybiphenyl) p-phenyldiacetate (PEOP) and poly 4', 4"'-[1, 2-ethanediyl-bis(oxy-2, 1-ethanediyloxy)]-bis(p-hydroxybiphenyl) terephthalate (PEOT), collectively called biphenyl-based liquid crystal polyesters (B-LCPE). The results show that B-LCPE possess the desired molecular structure, exhibit smectic phase in liquid crystal range and semicrystalline polymers at room temperature, and possess excellent intrinsic thermal conductivities, thermal stabilities, and mechanical properties. λ of PEOT is 0.51 W/(m·K), significantly exceeds that of polyethylene terephthalate (0.15 W/(m·K)) which has similar molecular structure with PEOT, and also higher than that of PEOS (0.32 W/(m·K)) and PEOP (0.38 W/(m·K)). The corresponding heat resistance index ( T HRI ), elasticity modulus, and hardness of PEOT are 174.6°C, 3.6 GPa, and 154.5 MPa, respectively, and also higher than those of PEOS (162.2°C, 1.8 GPa, and 83.4 MPa) and PEOP (171.8°C, 2.3 GPa, and 149.6 MPa).