A Commercial Clay-Based Material as a Carrier for Targeted Lysozyme Delivery in Animal Feed.
Marianna GuaglianoCinzia CristianiMatteo Dell'AnnoGiovanni DotelliElisabetta FinocchioMaria LacalamitaErnesto MestoSerena ReggiLuciana RossiEmanuela SchingaroPublished in: Nanomaterials (Basel, Switzerland) (2023)
The controlled supply of bioactive molecules is a subject of debate in animal nutrition. The release of bioactive molecules in the target organ, in this case the intestine, results in improved feed, as well as having a lower environmental impact. However, the degradation of bioactive molecules' in transit in the gastrointestinal passage is still an unresolved issue. This paper discusses the feasibility of a simple and cost-effective procedure to bypass the degradation problem. A solid/liquid adsorption procedure was applied, and the operating parameters (pH, reaction time, and LY initial concentration) were studied. Lysozyme is used in this work as a representative bioactive molecule, while Adsorbo ® , a commercial mixture of clay minerals and zeolites which meets current feed regulations, is used as the carrier. A maximum LY loading of 32 mg LY /g AD (LY(32)-AD) was obtained, with fixing pH in the range 7.5-8, initial LY content at 37.5 mg LY /g AD , and reaction time at 30 min. A full characterisation of the hybrid organoclay highlighted that LY molecules were homogeneously spread on the carrier's surface, where the LY-carrier interaction was mainly due to charge interaction. Preliminary release tests performed on the LY(32)-AD synthesised sample showed a higher releasing capacity, raising the pH from 3 to 7. In addition, a preliminary Trolox equivalent antioxidant capacity (TEAC) assay showed an antioxidant capacity for the LY of 1.47 ± 0.18 µmol TroloxEq/g with an inhibition percentage of 33.20 ± 3.94%.