Thermoelectric Properties and Low-Energy Carrier Filtering by Mo Microparticle Dispersion in an n-Type (CuI)0.003Bi2(Te,Se)3 Bulk Matrix.

We investigate the thermoelectric properties of (CuI)0.003Bi2Te2.7Se0.3/Mo (Mo: 0.0, 0.9, 1.3, 1.8, 3.1, and 4.3 vol %) composites, which were synthesized by extrinsic phase mixing with hot press sintering. From X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX) measurements, we confirm that micro-sized Mo particles are dispersed homogeneously in the (CuI)0.003Bi2Te2.7Se0.3 matrix without doping. While the electrical resistivity of Mo-dispersed (CuI)0.003Bi2Te2.7Se0.3 composites is not changed significantly, the Seebeck coefficient is significantly increased. Because the work function (5.3 eV) of the (CuI)0.003Bi2Te2.7Se0.3 compounds, measured by ultraviolet photoelectron spectroscopy (UPS), is larger than that of Mo particles (4.95 eV), we expect the potential barrier near the interfaces between the BTS matrix and Mo particles. The band bending effect and potential barrier can give rise to the low-energy carrier filtering. For a low concentration dispersion of Mo particles (<2 vol %), a decrease of Hall carrier concentration, an increase of Hall mobility, a decrease of effective mass, and an increase of Seebeck coefficient also support the formation of low-energy carrier filtering. The Mo dispersion does not affect the decrease in the lattice thermal conductivity but enhances the power factor significantly, leading to the high ZT value above 1.0 at room temperature, which is a high level in n-type thermoelectric room-temperature applications.