Forced Mineral Carbonation of MgO Nanoparticles Synthesized by Aerosol Methods at Room Temperature.
Kyungil ChoYeryeong KangSukbyung ChaeChanghyuk KimPublished in: Nanomaterials (Basel, Switzerland) (2023)
Magnesium oxide (MgO) has been investigated as a wet mineral carbonation adsorbent due to its relatively low adsorption and regeneration temperatures. The carbon dioxide (CO 2 ) capture efficiency can be enhanced by applying external force on the MgO slurry during wet carbonation. In this study, two aerosol-processed MgO nanoparticles were tested with a commercial MgO one to investigate the external force effect on the wet carbonation performance at room temperature. The MgO nano-adsorbents were carbonated and sampled every 2 h up to 12 h through forced and non-forced wet carbonations. Hydrated magnesium carbonates (nesquehonite, artinite and hydromagnesite) were formed with magnesite through both wet carbonations. The analyzed results for the time-dependent chemical compositions and physical shapes of the carbonation products consistently showed the enhancement of wet carbonation by the external force, which was at least 4 h faster than the non-forced carbonation. In addition, the CO 2 adsorption was enhanced by the forced carbonation, resulting in a higher amount of CO 2 being adsorbed by MgO nanoparticles than the non-forced carbonation, unless the carbonation processes were completed. The adsorbed amount of CO 2 was between the maximum theoretical amounts of CO 2 adsorbed by nesquehonite and hydromagnesite.