Immobilizing Polyether Imidazole Ionic Liquids on ZSM-5 Zeolite for the Catalytic Synthesis of Propylene Carbonate from Carbon Dioxide.

Traditional ionic liquids (ILs) catalysts suffer from the difficulty of product purification and can only be used in homogeneous catalytic systems. In this work, by reacting ILs with co-catalyst (ZnBr₂), we successfully converted three polyether imidazole ionic liquids (PIILs), i.e., HO-[Poly-epichlorohydrin-methimidazole]Cl (HO-[PECH-MIM]Cl), HOOC-[Poly-epichlorohydrin-methimidazole]Cl (HOOC-[PECH-MIM]Cl), and H₂N-[Poly-epichlorohydrin-methimidazole]Cl (H₂N-[PECH-MIM]Cl), to three composite PIIL materials, which were further immobilized on ZSM-5 zeolite by chemical bonding to result in three immobilized catalysts, namely ZSM-5-HO-[PECH-MIM]Cl/[ZnBr₂], ZSM-5-HOOC-[PECH-MIM]Cl/[ZnBr₂], and ZSM-5-H₂N-[PECH-MIM]Cl/[ZnBr₂]. Their structures, thermal stabilities, and morphologies were fully characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The amount of composite PIIL immobilized on ZSM-5 was determined by elemental analysis. Catalytic performance of the immobilized catalysts was evaluated through the catalytic synthesis of propylene carbonate (PC) from CO₂ and propylene oxide (PO). Influences of reaction temperature, time, and pressure on catalytic performance were investigated through the orthogonal test, and the effect of catalyst circulation was also studied. Under an optimal reaction condition (130 °C, 2.5 MPa, 0.75 h), the composite catalyst, ZSM-5-HOOC- [PECH-MIM]Cl/[ZnBr₂], exhibited the best catalytic activity with a conversion rate of 98.3% and selectivity of 97.4%. Significantly, the immobilized catalyst could still maintain high heterogeneous catalytic activity even after being reused for eight cycles.