Effect of Impact Position on Repaired Composite Laminates Subjected to Multi-Impacts.

Because the certification of aircraft structures requires significant costs and time-consuming experimental tests, all the studies carried out are strong contributions to the applicability of repairs based on adhesively bonded fibre composite patches. In this context, the main goal of this study aims to analyse the effect of the impact position on the multi-impact response of repaired composites. The results will be compared with those obtained in composites containing holes. Therefore, experimental tests will be carried out using an energy of 8 J and centrally supported samples. It was noted that the patch region proved to be very sensitive to impact due to its thickness. Full perforation occurred after two to three impacts, and to obtain higher strength it would be necessary to increase the thickness of the patch. However, depending on the location of the repair, this could bring aerodynamic problems. For the distance of 15 mm from the centre, an overlap region, the repaired laminate shows 494.7% higher impact strength than a laminate with a hole. In this case, the effect of the stress concentration is determinant in the impact fatigue life. Finally, for the 35 mm distances that are close to the border, no significant changes in impact fatigue life were observed for both the repaired laminates and those containing the hole. This leads to the conclusion that the border effect is much more significant than the presence of the hole for this distance.