Login / Signup

Effects of Using Aluminum Sulfate as an Accelerator and Acrylic Acid, Aluminum Fluoride, or Alkanolamine as a Regulator in Early Cement Setting.

Yihong ZhangYong WuPuyu ZhouZhiyuan SongYayun JiaWeiyi OuyangRafael LuqueYang Sun
Published in: Materials (Basel, Switzerland) (2023)
Aluminum sulfate was employed as the main accelerator in order to explore new non-chloride and alkali-free cement accelerators. Acrylic acid, aluminum fluoride, or alkanolamine were used as regulators to further accelerate cement setting. The setting time, compressive, and flexural strengths in cement early strength progress were detected, and both the cement (raw material) and hydrated mortar were fully characterized. The cement setting experiments revealed that only loading acrylic acid as the regulator would decrease the setting time of cement and increase the compressive and flexural strengths of mortar, but further introduction of aluminum fluoride or alkanolamine improved this process drastically. In the meantime, structural characterizations indicated that the raw material (cement) used in this work was composed of C 3 S (alite), while hydrated mortar consisted of quartz and C 3 A (tricalcium aluminate). During this transformation, the coordination polyhedron of Al 3+ was changed from a tetrahedron to octahedron. This work puts forward a significant strategy for promoting the activity of aluminum sulfate in cement setting and would contribute to the future design of new non-chloride and alkali-free cement accelerators.
Keyphrases
  • transcription factor
  • drinking water
  • current status