The biomechanical effects of S-type dynamic cage using Ti and PEEK for ACDF surgery on cervical spine varying loads.

Anterior cervical discectomy with fusion (ACDF) is the common method to treat the cervical disc degeneration. The most serious problems in the fusion cages are adjacent disc degeneration, loss of lordosis, pain, subsidence, and migration of the cage. The objective of our work is to develop the three-dimensional finite element (FE) model from C3-C6 and virtually implant a designed S-type dynamic cage at C4-C5 segment of the model. The dynamic cage design will provide mobility in the early stage after ACDF surgery. Titanium (Ti) and PEEK (polyether ether ketone) were used as the material property for the cages. We applied the physiological motions at different loads from 0.5, 1, 1.5, 2.0 Nm to evaluate the dynamic cage design and the biomechanical performances of the designed S-type dynamic cage. It was observed that in all the loading condition the range of motion in the adjacent level was maintained and the maximum stress at the adjacent disc was reduced. The clinical significance of the S-type dynamic cage is better stress profile at the fusion level and adjacent segments which translates into higher rate of fusion, lower risk of cage subsidence, lower risk of adjacent segment degeneration, and good mechanical stability.