Design and optimization of two-degree-of-freedom parallel four pure-slide- and four parallel quadrilateral-pair precision positioning platform.

Aiming at the complex structure, small output displacement, and low positioning accuracy of the two-degree-of-freedom (2-DOF) precision positioning platform, theoretical analyses and experimental tests are carried out so that the platform has the characteristics of compact structure, large output stroke, and high positioning accuracy. First, to optimize the structural parameters of the positioning platform, a modeling method to improve the modeling accuracy of the compliant mechanism of the positioning platform is proposed. A static model of the positioning platform based on Euler-Bernoulli beam theory and the sixth-order compliance matrix method is established, and the accuracy of the model is verified by simulation. In addition, the single-objective genetic optimization algorithm is used to optimize the structural size parameters of the positioning platform, and the optimal solution set of the structural size parameters of the positioning platform is obtained by taking the displacement amplification rate of the positioning platform as the optimization target. Finally, according to theoretical and simulation analysis and optimization results, an experimental prototype was fabricated, and a series of experimental tests were carried out on the working stroke, displacement magnification, and output stiffness. The experimental results show that the displacement magnification of the positioning platform reaches 3.39, the positioning stroke is 89.2 × 85.9 µm 2 , and the displacement resolutions of the x-axis and y-axis are 35 and 31 nm, respectively. The positioning platform designed in this paper meets the requirements of large output stroke and high positioning accuracy.