Integrated conversion of 1-butanol to 1,3-butadiene.
Jacob S KrugerTao DongGregg T BeckhamMary J BiddyPublished in: RSC advances (2018)
Renewed interest in production of 1,3-butadiene from non-petroleum sources has motivated research into novel production routes. In this study, we investigated an integrated process comprising 1-butanol dehydration over a γ-Al 2 O 3 catalyst to produce a mixture of linear butenes, coupled with a downstream K-doped Cr 2 O 3 /Al 2 O 3 catalyst to convert the butenes into butadiene. Linear butene yields greater than 90% are achievable at 360 °C in the dehydration step, and single-pass 1,3-butadiene yields greater than 40% are achieved from 1-butene in a N 2 atmosphere in the dehydrogenation step. In the integrated process, 1,3-butadiene yields are 10-15%. In all cases, linear C4 selectivity is greater than 90%, suggesting that 1,3-butadiene yields could be significantly improved in a recycle reactor. Doping the Cr 2 O 3 catalyst with different metals to promote H 2 consumption in a CO 2 atmosphere did not have a large effect on catalyst performance compared to an undoped Cr 2 O 3 catalyst, although doping with K in an N 2 -diluted atmosphere and with Ni in a CO 2 -enriched atmosphere showed slight improvement. In contrast, doping with K and Ca in a CO 2 -enriched atmosphere showed slightly decreased performance. Similarly, employing a CO 2 -enriched atmosphere in general did not improve 1,3-butadiene yield or selectivity compared to reactions performed in N 2 . Overall, this study suggests that an integrated dehydration/dehydrogenation process to convert 1-butanol into 1,3-butadiene could be feasible with further catalyst and process development.