Simulation of the Peritectic Phase Transition in Fe-C Alloys.

In this work, a multi-phase cellular automaton (CA) model is extended for the quantitative simulation of peritectic phase transition. First, the effects of cooling rate/supersaturation and temperature on the peritectic transformation kinetics in Fe-C alloys are investigated by utilizing the present CA model. The CA simulations show that supersaturations in the parent phases (liquid and δ-ferrite) increase the L/γ interface growth velocity remarkably, but tinily for the δ/γ interface migration velocity. There exists a transition supersaturation for isothermal transformations, at which the growth rates of the two interfaces are equal. The transition supersaturation is found to increase with decreasing temperature. Microstructural evolution at different cooling rates during peritectic transformation is simulated using the experimental conditions. At low cooling rates, the δ/γ interface propagates at a higher velocity than the L/γ interface. At high cooling rates, however, the γ-phase grows more into the L-phase with a cellular morphology. Then, the proposed CA model is applied to simulate the microstructural evolution during peritectic reaction. It is observed that the γ-phase propagates along the L/δ interface and finally encircles the δ-phase. Meanwhile, the intervenient γ-phase grows in thickness through peritectic transformation. The CA simulations are compared reasonably well with the experimental data and analytical calculations.