Login / Signup

Characterization of Highly Filled Glass Fiber/Carbon Fiber Polyurethane Composites with the Addition of Bio-Polyol Obtained through Biomass Liquefaction.

Adam OlszewskiPaweł NowakPaulina KosmelaŁukasz Piszczyk
Published in: Materials (Basel, Switzerland) (2021)
This work aims to investigate the process of obtaining highly filled glass and carbon fiber composites. Composites were manufactured using previously obtained cellulose derived polyol, polymeric methylene diphenyl diisocyanate (pMDI). As a catalyst, dibutyltin dilaurate 95% and Dabco® 33-LV were used. It was found that the addition of carbon and glass fibers into the polymer matrix causes an increase in the mechanical properties such as impact and flexural strength, Young's modulus, and hardness of the material. Moreover, the dynamic mechanical analysis (DMA) showed a significant increase in the material's storage modulus and rigidity in a wide range of temperatures. The increase in glass transition of soft segments can be noticed due to the limitation of macromolecules mobility in the material. The thermogravimetric analysis showed a four step decomposition, with maximal degradation rate at TmaxII = 320-330 °C and TmaxIII = 395-405 °C, as well as a significant improvement of thermal stability. Analysis of the material structure using a scanning electron microscope showed the presence of material defects such as voids, fiber pull-outs, and agglomerates of both fibers.
Keyphrases
  • reduced graphene oxide
  • drug delivery
  • aqueous solution
  • high resolution
  • gold nanoparticles
  • drug release
  • body composition
  • room temperature
  • resistance training
  • risk assessment
  • high intensity
  • sewage sludge