The Defects, Physicochemical Properties, and Surface Charge of MIL-88A (Al) Crystal Were Regulated for Highly Efficient Removal of Anionic Dyes: Preparation, Characterization, and Adsorption Mechanism.

In this paper, the physicochemical properties, surface charge, and crystal defects of MIL-88A (Al) were controlled by adjusting the ratio of metal ligands and temperature in the synthetic system without the addition of surfactants. The adsorption properties of different crystals for Congo red (CR) were studied. Among them, MIL-88A (Al)-130 and MIL-88A (Al)-d have the best adsorption properties. The maximum adsorption capacities are 600.8 and 1167 mg · g -1 , respectively. Compared with MIL-88A (Al)-130, the adsorption performance of MIL-88A (Al)-d was increased by 94.2%, and the adsorption rate was increased by about 4 times. It can be seen that increasing the proportion of metal ligands within a certain range will improve the adsorption capacity. The structure and morphology of the adsorbent were characterized by XRD, FTIR, SEM, EDS, TGA, BET, and zeta potential. The effects of time, temperature, pH, initial solution concentration, and dosage on CR adsorption properties were systematically discussed. The pseudo-second-order kinetic model and Langmuir isothermal model can well describe the adsorption process, which indicates that the adsorption process is a single-layer chemisorption occurring on a uniform surface. According to thermodynamics, this adsorption is an endothermic process. The mechanism of CR removal is proposed as the electrostatic attraction, hydrogen bond, metal coordination effect, π-π conjugation, crystal defect, and pore-filling effect. In addition, MIL-88A (Al)-d has good repeatability, indicating that it is a good material for treating anionic dye wastewater.