Carbon Aerogel Lightweight Al Battery for Fast Storage of Fluctuating Energy.

Al batteries have great potential for renewable energy storage owing to their low cost, high capacity, and safety. High energy density and adaptability to fluctuating electricity are major challenges. Here, a lightweight Al battery for fast storage of fluctuating energy is constructed based on a novel hierarchical porous dendrite-free carbon aerogel film (CAF) anode and an integrated graphite composite carbon aerogel film (GCAF) cathode. A new induced mechanism by the O-containing functional groups on the CAF anode was confirmed for uniform Al deposition. The GCAF cathode possesses a higher mass utilization ratio due to the extremely high loading mass (9.5-10.0 mg cm -2 ) of graphite materials compared to conventional coated cathodes. Meanwhile, the volume expansion of the GCAF cathode was almost negligible, resulting in better cycling stability. The lightweight CAF‖GCAF full battery can adapt well to large and fluctuating current densities owing to its hierarchical porous structure. A large discharge capacity (115.6 mAh g -1 ) after 2000 cycles and a short charge time (7.0 min) at a high current density were obtained simultaneously. The construction strategy of lightweight Al batteries based on carbon aerogel electrodes will promote the breakthrough of high-energy-density Al batteries adapted to the fast storage of fluctuating renewable energy. This article is protected by copyright. All rights reserved.