Developing a Biodegradable Film for Packaging with Lignocellulosic Materials from the Amazonian Biodiversity.
Danillo Wisky SilvaFelipe Gomes BatistaMário Vanoli ScatolinoAdriano Reis Prazeres MascarenhasDayane Targino De MedeirosGustavo Henrique Denzin TonoliDaniel Alberto Álvarez LazoFrancisco de Tarso Ribeiro CaselliTiago Marcolino de SouzaFrancisco Tarcisio Alves JuniorPublished in: Polymers (2023)
The development of packaging films made from renewable raw materials, which cause low environmental impact, has gained attention due to their attractive properties, which have become an exciting option for synthetic films. In this study, cellulose micro/nanofibrils (MFC/NFC) films were produced with forest residues from the Amazon region and evaluated for their potential to generate alternative packaging to traditional plastic packaging. The MFC/NFC were obtained by mechanical fibrillation from fibers of açaí seeds ( Euterpe oleracea ), titica vine ( Heteropsis flexuosa ), and commercial pulps of Eucalyptus sp. for comparison. The fibrillation of the titica vine culminated in higher energy expenditure on raw materials. The açaí films showed a higher tensile strength (97.2 MPa) compared to the titica films (46.2 MPa), which also showed a higher permeability rate (637.3 g day -1 m -2 ). Films of all raw materials scored the highest in the grease resistance test (n° 12). The films produced in the study showed potential for use in packaging for light and low moisture products due to their adequate physical, mechanical, and barrier characteristics. New types of pre-treatments or fibrillation methods ecologically correct and viable for reducing energy consumption must be developed, mainly for a greater success of titica vine fibrillation at the nanoscale.