Deep learning-enabled prediction of 2D material breakdown.

Characterizing electrical breakdown limits of materials is a crucial step in device development. However, methods for repeatable measurements are scarce in two-dimensional materials, where breakdown studies have been limited to destructive methods. This restricts our ability to fully account for variability in local electronic properties induced by surface contaminants and the fabrication process. To tackle this, we implement a two-step deep-learning model to predict the breakdown mechanism and breakdown voltage of monolayer MoS2devices with varying channel lengths and resistances using current measured in the low-voltage regime as inputs. A deep neural network (DNN) first classifies between Joule and avalanche breakdown mechanisms using partial current traces from 0 to 20 V. Following this, a convolutional long short-term memory network (CLSTM) predicts breakdown voltages of these classified devices based on partial current traces. We test our model with electrical measurements collected using feedback-control of the applied voltage to prevent device destruction, and show that the DNN classifier achieves an accuracy of 79% while the CLSTM model has a 12% error when requiring only 80% of the current trace as inputs. Our results indicate that information encoded in the current behavior far from the breakdown point can be used for breakdown predictions, which will enable non-destructive and rapid material characterization for 2D material device development.