A raindrop solar cell can work either on rainy days to collect mechanical energy of the raindrops or on sunny days to harvest solar energy, which achieves high energy conversion efficiency in various energy environments. However, the low efficiency of raindrop energy harvesting is a dominating barrier to the raindrop solar cells in practical applications. In this work, a MoO 3 /top electrode-based triboelectric nanogenerator (MT-TENG) with high rain droplet energy conversion efficiency, integrated with a perovskite solar cell through shared electrodes, has been proposed. The interface electrons between the triboelectric layer and electrode can be blocked by the MoO 3 layer with high permittivity and wide bandgap, and the MoO 3 -based TENG (M-TENG) therefore increases the surface charge density. Thus, the top electrode structure in the solid-liquid interface can greatly increase the output charge by 101.1 times in total. By adjusting the water droplet parameters of tap water to simulate the actual application scenario, the raindrop output power and mechanical energy conversion efficiency can reach 0.68 mW and 12.49%, respectively. In addition, due to the high transmittance of the MT-TENG, the perovskite solar cell can still sustain a high photovoltaic power conversion efficiency of 19.38%. By virtue of the shared electrode circuit design, the raindrop solar cell can continue to purvey electric power on rainy and sunny days, and it only takes about 175 s to charge a 2.2 μF capacitor to 5 V.